The influence of the wall temperature on the flow from the floor convector (experimental results)
1 Technical University of Liberec,Faculty of Mechanical Engineering, 46117 Liberec 1, Czech Republic
2 Technical University of Liberec,Faculty of Mechatronics, Informatics and Interdisciplinary Studies, 46117 Liberec 1,
This article describes the measurement of the influnce of the wall temperature on flow from the floor convector. The measurement is realized in an open space laboratory inlet and outlet is visulized using PIV technique. Two temperatures 19.8 °C and 12.5 °C are set at the wall to evaluate the influnce of the wall cooling.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.