Measurement of heat transfer coefficient using termoanemometry methods
1 Technical university of Liberec, Dept. of Power Engineering Equipment, Studentská 2, 461 17 Liberec 1, Czech Republic
2 Institute of Thermomechanics, CAS, v.v.i., Dolejškova 5, 180 00 Praha 8, Czech Republic
a Corresponding author: email@example.com
Published online: 25 March 2014
This work deals with a measurement of heat transfer from a heated flat plate on which a synthetic jet impacts perpendicularly. Measurement of a heat transfer coefficient (HTC) is carried out using the hot wire anemometry method with glue film probe Dantec 55M47. The paper brings also results of velocity profiles measurements and turbulence intensity calculations.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.