Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate
1 DynaMat Laboratory, University of Applied Sciences of Southern Switzerland, 6952 Canobbio, Switzerland
2 Department of Structural, Geotechnical and Building Engineering - Politecnico di Torino, 10129 Torino, Italy
3 Laboratory for Nuclear Materials, Nuclear Energy and Safety Research Department, Paul Scherrer Institut, 5232 Villigen PSI, Switzerland
a Corresponding author: firstname.lastname@example.org
Published online: 7 September 2015
This paper presents an experimental investigation on the influence of the temperature on the reduced activation steel Eurofer97 under uniaxial tensile loads at high strain rate. Round undamaged specimens of this material having gauge length 5 mm, diameter 3 mm, were tested in universal machine to obtain its stress-strain relation under quasi-static condition (0.001s−1), and in modified Hopkinson bar to study its mechanical behaviour at high strain rates (300 s−1, 1000 s−1) respectively. The tests at high strain rate were carried out at 450 °C and at nitrogen temperature. Finally, the parameters of the Zerilli-Armstrong constitutive material relationship were obtained.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.