Thermosyphon Method for Cooling the Rotor Blades of High-Temperature Steam Turbines
1 Kutateladze Institute of Thermophysics SB RAS, Novosibirsk 630090, Russia
2 Institute of Power Engineering, Kuzbass State Technical University named after T.F. Gorbachev, Kemerovo, 650000, Russia
a Corresponding author: email@example.com
Published online: 23 February 2016
The design scheme of closed two-phase thermosyphon were suggested that can provide standard thermal operation of blades of high-temperature steam turbine. The method for thermosyphon calculation is developed. The example of thermal calculation was implemented, it showed that to cool the steam turbine blades at their heating by high-temperature steam, the heat can be removed in the rear part of the blades by air with the temperature of about 440°C.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.