PIV and LIF study of slot continuous jet at low Reynolds number
1 Institute of Thermomechanics, the Czech Academy of Sciences, 182 00 Prague, Czech Republic
2 Institute of Applied Mechanics, National Taiwan University, Taipei, Taiwan R.O.C.
a Corresponding author: firstname.lastname@example.org
Published online: 28 March 2016
This study deals with a continuous jet issuing from a small narrow slot with a width of 0.36 mm. The experimental arrangement is based on the piezoelectric synthetic jet actuator studied previously for easy comparisons. The working fluid is water at room temperature. The experiments were performed using methods of particle image velocimetry (PIV) and flow visualization (laser induced fluorescence, LIF). The time-mean volume flux through the exit nozzle was quantified using precise scales. The mean velocity and the Reynolds number were evaluated as Um = 0.12 m/s and Re = 90, respectively. The results of LIF and PIV techniques revealed the three-dimensional character of the flow field, namely the saddle-shape velocity profiles. This behavior is typical for steady jets from a rectangular nozzle. The obtained results were compared with previous measurements of the synthetic jet issuing from the same cavity and the slot nozzle.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.