Open Access
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 04051
Number of page(s) 5
Section Modeling and Numerical Simulation
Published online 07 September 2015
  1. Riedel, W., Harwick, W., White, D.M. & Clegg, R.A. (2003) ADAMMO – advanced material damage models for numerical simulation codes. ESA CR(P) 4397, EMI report I 75/03, Freiburg
  2. Riedel, W., Nahme, H., White, D.M. & Clegg R.A. (2006) Hypervelocity impact damage prediction in composites: part II – experimental investigations and simulations. Int. J. Impact Engng 33, 670–80 [CrossRef]
  3. Hiermaier. S., Riedel, W., Hayhurst, C., Clegg, R.A. & Wentzel, C. (1999) AMMHIS – advanced material models for hypervelocity impact simulations. Final report, EMI report E 43/98, ESA CR(P) 4305, Freiburg
  4. White, D.M., Wicklein, M., Clegg, R.A. & Nahme, H. (2008) Multi-layer insulation material models suitable for hypervelocity impact simulations. Int. J. Impact Engng 35(12), 1853-1860 [CrossRef]
  5. White, D.M., Taylor, E.A. & Clegg, R.A. (2003) Numerical simulation and experimental characterization of direct hypervelocity impact on a spacecraft hybrid carbon fibre/Kevlar composite structure. Int. J. Impact Eng 29(1–6), 779–90 [CrossRef]
  6. ABAQUS 6.10. Theory manual (2010) Dassault System
  7. Wicklein, M., Ryan, S., White, D.M. & Clegg, R.A. (2008) Hypervelocity impact on CFRP: Testing, material modelling, and numerical simulation. Int. J. Impact Engng 35: 1861–1869 [CrossRef]
  8. Hashin, Z. (1980) Failure criteria for unidirectional fibre composites. J. Appl. Mech. 47: 321–329
  9. Puck, A. & Schürmann, H. (1998) Failure analysis of FRP laminates by means of physically based phenomenological models. Comp. Sci. Technol. 58(7): 1045–1067 [CrossRef]
  10. Simulia Abaqus technical brief (2012) Simulation of the ballistic performance of aluminium plates with Abaqus/Explicit, USA
  11. Phadnis, V.A., Makhdum, F., Roy, A. & Silberschmidt, V.V. (2013) Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation. Comp. Pt A 47: 41–51 [CrossRef]