| Issue |
EPJ Web Conf.
Volume 221, 2019
XXVI Conference on Numerical Methods for Solving Problems in the Theory of Elasticity and Plasticity (EPPS-2019)
|
|
|---|---|---|
| Article Number | 01016 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/epjconf/201922101016 | |
| Published online | 30 October 2019 | |
https://doi.org/10.1051/epjconf/201922101016
A Micromechanical Model of Additively Manufactured Aluminum Alloys
1
Institute of Strength Physics and Materials Science of SB RAS, Laboratory of Mechanics of Heterogeneous Media, 634055 Tomsk, Russia
2
National Research Tomsk State University, Faculty of Physics and Engineering, 634050 Tomsk, Russia
3
University of Bremen, ISEMP, 28359 Bremen, Germany
* Corresponding author: emelianova@ispms.tsc.ru
Published online: 30 October 2019
A micromechanical model is developed to predict the deformation behavior of additively manufactured aluminum alloys. Three-dimensional models of grain structures typical for different microregions of the melt pool are generated by the step-by-step packing method. A crystal plasticity-based constitutive model accounting for the elastic-plastic anisotropy of face-centered cubic crystals is employed to simulate the microscale deformation in an additively manufactured aluminum alloy under loading. The grain shape and texture effects on the plastic strain localization patterns are analyzed.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.