| Issue |
EPJ Web Conf.
Volume 363, 2026
International Conference on Low-Carbon Development and Materials for Solar Energy (ICLDMS’26)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 12 | |
| Section | Engineering Materials | |
| DOI | https://doi.org/10.1051/epjconf/202636302003 | |
| Published online | 16 April 2026 | |
https://doi.org/10.1051/epjconf/202636302003
Development of Prosthetic Robotic Hand Using EMG Sensor for Upper-Limb Amputees
Department of Electronics and Communication Engineering, Saveetha Engineering College, Chennai, India
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Published online: 16 April 2026
Abstract
Conventional body-powered systems eventually suffer from the limitations of the relatively low force and dexterity these can offer while requiring strenuous exertion to operate, and advanced myoelectric systems tend to rely on complex algorithms and expensive hardware and calibration routines. These challenges present significant barriers to access of functional prosthetic hands for upper-limb amputees. This paper presents an EMG-controlled three-fingered prosthetic robotic hand based on non-invasive surface electromyography signals from healthy distal residual forearm muscles. The proposed system integrates analog signal conditioning, time-domain feature extraction (Mean Absolute Value) and threshold-based classification to enable Arduino-based real-time processing for servo-driven mechanical actuation. The system achieves 92.5% single-gesture and 88.4% multi-gesture accuracy, with a total average response time of 290 ms, confirming that simplified embedded control can deliver performance and reliability for practical prosthetic functionality in a daily-assist device.
Key words: rosthetic Robotic Hand / Upper-Limb Amputees / Myoelectric Control / Signal Processing / Arduino Microcontroller / Low-Cost Prosthesis
© The Authors, published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.

