| Issue |
EPJ Web Conf.
Volume 372, 2026
Advanced Power Systems (APS 2026)
|
|
|---|---|---|
| Article Number | 07002 | |
| Number of page(s) | 5 | |
| Section | Power and Energy Systems | |
| DOI | https://doi.org/10.1051/epjconf/202637207002 | |
| Published online | 11 June 2026 | |
https://doi.org/10.1051/epjconf/202637207002
Implementation of control for a buck-type DC-DC converter on an RCP platform
1 Dept. of Power Electronics and Power Engineering, Rzeszow University of Technology
2 Department of Electrical, Electronic, Computers and Systems Engineering, University of Oviedo
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Published online: 11 June 2026
Abstract
This paper presents the process of implementing and commissioning a control system for a buck- type DC-DC converter using the Imperix B-Box Rapid Control Prototyping (RCP) platform. The main objective of the study was to design and experimentally validate a digital output voltage controller developed in the MATLAB/Simulink environment and directly deployed on the hardware platform. The paper describes the overall system architecture, the implementation procedure of the proportional–integral (PI) control algorithm, and the experimental results confirming proper system operation. The obtained results demonstrate that the Imperix B-Box RCP platform is an effective and flexible tool for rapid prototyping of control algorithms in power electronics applications.
© The Authors, published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.