EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 344 (2025) EPJ Web Conf., 344 (2025) 01003 References
Open Access
Issue
EPJ Web Conf.
Volume 344, 2025
AI-Integrated Physics, Technology, and Engineering Conference (AIPTEC 2025)
Article Number 01003
Number of page(s) 9
Section AI-Integrated Physics, Technology, and Engineering
DOI https://doi.org/10.1051/epjconf/202534401003
Published online 22 December 2025
  1. O. V. Byakova, S. Gnyloskurenko, A. O. Vlasov, Y. Yevych, N. Semenov, and D. Kytranov, The role of cell collapse mechanism in mechanical performance of aluminium foam fabricated by melt processing. Key Eng Mater. 2024, (2024). https://doi.org/10.4028/p-03cmzt [Google Scholar]
  2. A. Gopinathan, J. Jerz, J. Kováčik, and T. Dvořák, Investigation of the relationship between morphology and thermal conductivity of powder metallurgically prepared aluminium foams. Materials. 14, 3623 (2021). https://doi.org/10.3390/ma14133623 [Google Scholar]
  3. G. Epasto, F. Distefano, H. Mozafari, E. Linul, and V. Crupi, Nondestructive evaluation of aluminium foam panels subjected to impact loading. Applied Sciences. 11, 1148 (2021). https://doi.org/10.3390/app11031148 [Google Scholar]
  4. M. S. Raza, S. Datta, and P. Saha, Thermal and morphological analysis of the interaction effect of different assist gases with gas-filled closed-cell aluminium foam during laser cutting process. Proc Inst Mech Eng B J Eng Manuf. 2020, (2020). https://doi.org/10.1177/0954405420917252 [Google Scholar]
  5. T. Fiedler and N. Movahedi, Compact aluminium foam heat exchangers. Metals (Basel). 13, 1440 (2023). https://doi.org/10.3390/met13081440 [Google Scholar]
  6. M. Brůna, I. Vasková, and M. Galčík, Numerical simulation and experimental validation of melt flow in the naturally pressurized gating system. Processes. 9, 1931 (2021). https://doi.org/10.3390/pr9111931 [Google Scholar]
  7. D. Izzatus Tsamroh, D. Puspitasari, P. Puspitasari, and M. Mustapha, Microstructure and hardness study of Al6061 resulting from artificial aging. Vokasi Unesa Bulletin of Engineering, Technology and Applied Science. 2, 48–56 (2025). https://doi.org/10.26740/vubeta.v2i1.34984 [Google Scholar]
  8. I. Nová, K. Fraňa, P. Solfronk, D. Koreček, and J. Sobotka, Properties of aluminium cellular materials produced by powder metallurgy using the foaming agent TiH₂. Manufacturing Technology. 22, (2022). https://doi.org/10.21062/mft.2022.051 [Google Scholar]
  9. H. Basri, J. Jalaluddin, R. Tarakka, M. Syahid, and M. A, Ilahi Rahmadhani. Study of modified absorber plate with aluminium foam of solar water heating system. Applied Mechanics and Materials. 2023, (2023). https://doi.org/10.4028/p-u5qx47 [Google Scholar]
  10. M. Madgule, P. V. L. Sagar, S. Palanisamy, K. V. V. R. Rao, M. V, Reddy, and R. R. Kumar. Influence of foaming agents on mechanical and microstructure characterization of AA6061 metal foams. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering. 2022, (2022). https://doi.org/10.1177/09544089221097534 [Google Scholar]
  11. Y. Zhao, C. Yunfei, L. Li, J. Zhang, and C. Xiukang, Experimental and finite element simulation study of the mechanical behaviors of aluminum foam-filled single/double tubes. Mater Res Express. 2023, (2023). https://doi.org/10.1088/2053-1591/acc2a4 [Google Scholar]
  12. L. Cui, Y. Li, W. Zhang, J. Liu, T. Liu, and Z. Fan, Compression fatigue properties of closed‐cell aluminum alloy foams fabricated by two‐step foaming method. Adv Eng Mater. 2025, (2025). https://doi.org/10.1002/adem.202402769 [Google Scholar]
  13. J. Wang, Y. Wang, X. He, T. Wang, and C. Li, Axial impact performances of composite aluminum foam tubes. Adv Eng Mater. 2024, (2024). https://doi.org/10.1002/adem.202400897 [Google Scholar]
  14. Y. Hangai, T. Takagi, Y. Goto, and K. Amagai, Fabrication of two-layer aluminum foam consisting of dissimilar aluminum alloys using optical heating. Materials. 17, 894 (2024). https://doi.org/10.3390/ma17040894 [Google Scholar]
  15. W. D. CallisterJr and D. G. Rethwisch, Materials science and engineering: an introduction. John Wiley & Sons. 2020, (2020). [Google Scholar]
  16. H. Zhang, M. Lei, Z. Lin, W. Gong, J. Shen, and Y. Zhang, The compressive properties and deformation mechanism of closed-cell aluminum foam with high porosity after high-temperature treatment. Sustainability. 14, 9850 (2022). https://doi.org/10.3390/su14169850 [Google Scholar]
  17. F. Rahimidehgolan and W. Altenhof, Compressive behavior and deformation mechanisms of rigid polymeric foams: a review. Composites Part B. 110513, (2023). https://doi.org/10.1016/j.compositesb.2023.110513 [Google Scholar]
  18. Y. Xiao, J. Yin, X. Zhang, X. An, Y. Xiong, and Y. Sun, Mechanical performance and cushioning energy absorption characteristics of rigid polyurethane foam at low and high strain rates. Polym Test. 109, (2022). https://doi.org/10.1016/j.polymertesting.2022.1075 31 [Google Scholar]
  19. M. A. A. Hasan, K. A. Jasim, and H. A. J. Miran, Synthesis and comparative analysis of crystallite size and lattice strain of Pb₂Ba₁.₇Sr₀.₃Ca₂Cu₃O₁₀₊δ superconductor. Korean J Mater Res. 32, 66–71 (2022). https://doi.org/10.3740/MRSK.2022.32.2.66 [Google Scholar]
  20. J. Rakhmonov, K. Liu, P. Rometsch, N. Parson, and X.-G. Chen, Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high- temperature exposure through dispersoid strengthening. Materials. 13, 5295 (2020). https://doi.org/10.3390/ma13225295 [Google Scholar]
  21. Z. Xu, H. Ma, N. Zhao, and Z. Hu, Investigation on compressive formability and microstructure evolution of 6082-T6 aluminum alloy. Metals (Basel). 10, 469 (2020). https://doi.org/10.3390/met10040469 [Google Scholar]
  22. M. S. Kim, D.-Y. Kim, Y. Do Kim, H. Choi, and S. H. Kim, Archives of Metallurgy and Materials. 2021, (2021). https://doi.org/10.24425/amm.2021.136380 [Google Scholar]
  23. B. Parveez, N. A. Jamal, H. Anuar, Y. Ahmad, A. Aabid, and M. Baig, Microstructure and mechanical properties of metal foams fabricated via melt foaming and powder metallurgy technique: a review. Materials. 15, 5302 (2022). https://doi.org/10.3390/ma15155302 [Google Scholar]
  24. N. K. Singh and S. Balaguru, Development and characterization of aluminium AA7075 hybrid composite foams (AHCFs) using SiC and TiB₂ reinforcement. 2022, (2022). https://doi.org/10.21203/rs.3.rs-1718478/v1 [Google Scholar]
  25. F. Garai. Modern applications of aluminium foams, Int J Eng Manag Sci. 5, 14–21 (2020). https://doi.org/10.21791/ijems.2020.2.3 [Google Scholar]
  26. K. Grilec, I. Bunjan, and S. Jakovljević, The influence of applied force on aluminium foams energy absorption. Tehnicki Vjesnik - Technical Gazette. 2021, (2021). https://doi.org/10.17559/tv- 20200109101038 [Google Scholar]
  27. A. K. Srivastava, N. K. Maurya, M. Maurya, S. P. Dwivedi, and A. Saxena, Effect of multiple passes on microstructural and mechanical properties of surface composite Al 2024/SiC produced by friction stir processing. Annales De Chimie Science Des Matériaux. 44, (2020). https://doi.org/10.18280/acsm.440608 [Google Scholar]
  28. A. J. Ansari and M. Anas, Review and analysis of the effect of variables on aluminium based surface composite fabricated through friction stir processing method. Int J Adv Technol Eng Explor. 9, (2022). https://doi.org/10.19101/ijatee.2021.875903 [Google Scholar]
  29. N. M. Siddesh Kumar, S. P. Chethan, T. G. Nikhil, and Dhruthi, A review on friction stir processing over other surface modification processing techniques of magnesium alloys. Funct Compos Struct. 4, (2022). https://doi.org/10.1088/2631- 6331/ac49f3 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.