EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 349 (2026) EPJ Web Conf., 349 (2026) 01005 References
Open Access
Issue
EPJ Web Conf.
Volume 349, 2026
18th European Workshop on Modern Developments and Applications in Microbeam Analysis (EMAS 2025)
Article Number 01005
Number of page(s) 11
DOI https://doi.org/10.1051/epjconf/202634901005
Published online 29 January 2026
  1. Hagedorn, W., et al., Alloy and process design offorging steels for better environmental performance. Sustainable Materials and Technologies, 2022. 34. [Google Scholar]
  2. Gramlich, A., et al., Air Cooling Martensites—The Future of Carbon Neutral Steel Forgings? Advanced Engineering Materials, 2023. 25(15). [Google Scholar]
  3. Gramlich, A., et al., Development of air-hardening martensitic forging steels. Materials Science and Engineering: A, 2020. 784. [Google Scholar]
  4. Gramlich, A., M.A. Auger, and S. Richter, Plasma Nitriding of an Air-Hardening Medium Manganese Forging Steel. HTM Journal of Heat Treatment and Materials, 2022. 77(4): p. 298–315. [Google Scholar]
  5. Hoffmann, R., E.J. Mittemeijer, and M.A.J. Somers, Verbindungsschichtbildung beim Nitrieren undNitrocarburieren. HTM Journal of Heat Treatment and Materials, 1996. 51(3): p. 162–169. [Google Scholar]
  6. Sommer, M., et al., Investigation of Compound Layer Structures after Nitriding and Nitrocarburizing of Quenched and Tempered Steels. HTM Journal of Heat Treatment and Materials, 2021. 76(3): p. 219–236. [Google Scholar]
  7. Jost, M., Nitrieren in Gas und im Plasma. Prozesswärme 2019. 01(05): p. 85–90. [Google Scholar]
  8. Anne Satir-Kolorz, H.K.F.u.M.O.S., Über die Löslichkeit von Stickstoff in Eisen- und Stahlgusslegierungen unter erhöhtem Druck. 1989. [Google Scholar]
  9. M. Kopcewicz, J.J., A. Turos and G. Gawlik, Enhanced stability of nitrides in alpha-Fe co-implanted with Cr+N or Al+N. Nuclear Instruments and Methods in Physics Research, 1993. B80/81: p. 327–331. [Google Scholar]
  10. Hosmani, S.S., R.E. Schacherl, and E.J. Mittemeijer, The kinetics of the nitriding of Fe-7Cr alloys; the role of the nitriding potential. Materials Science and Technology, 2013. 21(1): p. 113–124. [Google Scholar]
  11. Richter, P.T.P.a.S., Quantification of low concentration elements using soft X-rays at high spatial resolution. IOP Conference Series: Materials Science and Engineering, 2016. 109. [Google Scholar]
  12. Tabata, T., et al., Challenge of fabricating difficult-to-nitride materials: Formation of martensitic phase in (Fe0.8Co0.2)8N foil based on industrially suitable gas-nitriding process. AIP Advances, 2024. 14(6). [Google Scholar]
  13. Pinedo, C.E. and W.A. Monteiro, On the kinetics of plasma nitriding a martensitic stainless steel type AISI420. Surface and Coatings Technology, 2004. 179(2-3): p. 119–123. [CrossRef] [Google Scholar]
  14. Bobadilla, M. and A. Tschiptschin, On the Nitrogen Diffusion in a Duplex Stainless Steel. Materials Research, 2015. 18(2): p. 390–394. [Google Scholar]
  15. Mehedi, M., et al., Nitriding and martensitic phase transformation of the copper and boron doped iron nitride magnet. Acta Materialia, 2019. 167: p. 80–88. [Google Scholar]
  16. Crank, J., The-Mathematics-of-Diffusion. Second Edition ed. 1975. [Google Scholar]
  17. Hahn, I., et al., Low-Temperature Plasma Nitriding of Martensitic andAustenitic Steels to Increase Tribocorrosion Resistance*. HTM Journal of Heat Treatment and Materials, 2023. 78(1): p. 49–61. [Google Scholar]
  18. Mandl, S., J.W. Gerlach, and D. Manova, Nitrogen isotope marker experiments in austenitic stainless steel for identification of trapping/detrapping processes at different temperatures. Surface and Coatings Technology, 2023. 472. [Google Scholar]
  19. Parascandola, S., W. Möller, and D.L. Williamson, The nitrogen transport in austenitic stainless steel at moderate temperatures. Applied Physics Letters, 2000. 76(16): p. 2194–2196. [Google Scholar]
  20. Tao, X., et al., Active screen plasma nitriding of Fe-24Mn-2Al-0.45C TWIP steel: Microstructure evolution and a synergistic selective oxidation mechanism. Acta Materialia, 2022. 241. [Google Scholar]
  21. Türk, A., O. Ok, and C. Bindal, Structural characterization of fluidized bed nitrided steels. Vacuum, 2005. 80(4): p. 332–342. [Google Scholar]
  22. Akkus, C.S., Richter, S., Gorin, N, Krupp, U., Gramlich, A, The Potentail of Medium Manganese Steels for Nitriding Applications. 2024. [Google Scholar]
  23. Moskalioviene, T., et al., Modeling of nitrogen penetration in polycrystalline AISI 316L austenitic stainless steel during plasma nitriding. Surface and Coatings Technology, 2011. 205(10): p. 3301–3306. [Google Scholar]
  24. Edenhofer, B., Physikalische und metallkundliche Vorgänge beim Nitrieren im Plasma einer Glimmentladung. HTM Journal of Heat Treatment and Materials, 1974. 29(2): p. 105–122. [Google Scholar]
  25. Berger, H.J.S.a.D., Innere Nitrierung von Eisenwerkstoffen. HTM Journal of Heat Treatment and Materials, 1992. 47. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.