EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 374 (2026) EPJ Web Conf., 374 (2026) 04001 References
Open Access
Issue
EPJ Web Conf.
Volume 374, 2026
1st International Conference on Electronic, Optical Devices and Intelligent Systems (ICEODIS 2026)
Article Number 04001
Number of page(s) 12
Section Materials Science, Nanotechnology and Mechanical Engineering
DOI https://doi.org/10.1051/epjconf/202637404001
Published online 24 June 2026
  1. S. Farahany et al., The Effect of Bismuth and Tin on Mechanical and Tribological Performance of Compocast Aluminum Hybrid Composites Reinforced with Al2O3, ZrO2, and SiC. Journal of Materials Engineering and Performance, vol. 34, no. 20, pp. 23418-23434, Mar. 2025, doi: https://doi.org/10.1007/s11665-025-10987-z [Google Scholar]
  2. S. Farahany et al., “Tailoring the solidification behaviour of recycled Al-Fe-Si alloy through gadolinium additions: a thermal analysis and microstructural investigation,” Journal of Thermal Analysis and Calorimetry, vol. 150, no. 18, pp. 14009-14021, May 2025, doi: https://doi.org/10.1007/s10973-025-14314-5 [Google Scholar]
  3. A. M. H. Altameemi, T. A. Abu Bakar, S. Farahany, M. A. Sulong, and H. Ghandvar, “Effect of Gadolinium Addition on the Thermal, Microstructural, Mechanical, and Tribological Properties of Recycled Al-0.5Fe-0.5Si Alloy,” Journal of Materials Engineering and Performance, Nov. 2025, doi: https://doi.org/10.1007/s11665-025-12646-9 [Google Scholar]
  4. Rajasekaran Ambigai and S. Prabhu, “Optimizing and characterization of Aluminium based functionally graded Silicon Nitride composite,” Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, vol. 235, no. 18, pp. 3611-3623, Sep. 2020, doi: https://doi.org/10.1177/0954406220960784 [Google Scholar]
  5. Subhash Chandra Ram, K. Chattopadhyay, and A. Bhushan, “A literature review on Al-Si alloy matrix based in situ Al-Mg2Si FG-composites: Synthesis, microstructure features, and mechanical characteristics,” Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, vol. 237, no. 4, pp. 919-940, Sep. 2022, doi: https://doi.org/10.1177/09544062221124064 [Google Scholar]
  6. A. A. Bhutto and M. S. Wahab, “Effect of Al2o3 on Mechanical Properties of Adc14 Hypereutectic Alsi Composite,” SSRN Electronic Journal, 2022, doi: https://doi.org/10.2139/ssrn.4134145 [Google Scholar]
  7. A. Ramanathan, P. K. Krishnan, and R. Muraliraja, “A review on the production of metal matrix composites through stir casting-Furnace design, properties, challenges, and research opportunities,” Journal of Manufacturing Processes, vol. 42, pp. 213-245, Jun. 2019, doi: https://doi.org/10.1016/jjmapro.2019.04.017 [Google Scholar]
  8. P. Yadav, A. Ranjan, H. Kumar, A. Mishra, and J. Yoon, “A Contemporary Review of Aluminium MMC Developed through Stir-Casting Route,” Materials, vol. 14, no. 21, p. 6386, Oct. 2021, doi: https://doi.org/10.3390/ma14216386 [Google Scholar]
  9. J. Hashim, L. Looney, and M. S. J. Hashmi, “The enhancement of wettability of SiC particles in cast aluminium matrix composites,” Journal of Materials Processing Technology, vol. 119, no. 13, pp. 329-335, Dec. 2001, doi: https://doi.org/10.1016/s0924-0136(01)00919-0 [Google Scholar]
  10. S. Shin et al., “Dispersion Mechanism and Mechanical Properties of SiC Reinforcement in Aluminum Matrix Composite through Stir-and Die-Casting Processes,” Applied Sciences, vol. 11, no. 3, p. 952, Jan. 2021, doi: https://doi.org/10.3390/app11030952 [Google Scholar]
  11. Y. Song, G. Yang, Y. Liang, H. Xue, and J. Lin, “Effect of rare-earth element Gd addition on microstructure of TNM-based TiAl alloys,” Materials Letters, vol. 358, p. 135879, Mar. 2024, doi: https://doi.org/10.1016/j.matlet.2024.135879 [Google Scholar]
  12. K.-Y. Wang et al., “Improving microstructure and mechanical properties of hypoeutectic Al-Mg2Si alloy by Gd addition,” Journal of Alloys and Compounds, vol. 813, p. 152178, Jan. 2020, doi: https://doi.org/10.1016/jja11com.2019.152178 [Google Scholar]
  13. J. Chen, L. Gu, and G. He, “A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites," Advances in Manufacturing, vol. 8, no. 3, pp. 279-315, Jul. 2020, doi: https://doi.org/10.1007/s40436-020-00313-2 [Google Scholar]
  14. F. A. Shamim, A. Dvivedi, and P. Kumar, “Fabrication and characterization of Al6063/SiC composites using electromagnetic stir casting process," Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 236, no. 1, pp. 187193, Oct. 2021, doi: https://doi.org/10.1177/09544089211045796 [Google Scholar]
  15. B. Wu, S. Shang, L. Cai, H. Tang, B. Lei, and Z. Xu, “Rare earth elements in cast aluminum alloys: Microstructural control and performance enhancement," Journal of Rare Earths, Jul. 2025, doi: https://doi.org/10.1016/jjre.2025.07.028 [Google Scholar]
  16. S. L. Joy-Yii and D. Kurniawan, “Effect of Rare Earth Addition on Microstructure and Mechanical Properties of Al-Si Alloys: An Overview," Advanced Materials Research, vol. 845, pp. 27-30, Dec. 2013, doi: https://doi.org/10.4028/www.scientific.net/amr.845.27 [Google Scholar]
  17. U. Patakham, J. Kajornchaiyakul, and C. Limmaneevichitr, “Grain refinement mechanism in an Al-Si-Mg alloy with scandium," Journal of Alloys and Compounds, vol. 542, pp. 177-186, Nov. 2012, doi: https://doi.org/10.1016jja11com.2012.07.018 [Google Scholar]
  18. Y. Li, X. Fan, F. Qin, X. Zhao, and K. Cao, “Effect of Gd Addition on Hot Deformation Behavior and Microstructure Evolution of 7075 Aluminum Alloy," Journal of Wuhan University of Technology-Mater. Sci. Ed., vol. 39, no. 6, pp. 1595-1612, Nov. 2024, doi: https://doi.org/10.1007/s11595-024-3030-3. [Google Scholar]
  19. J. Y. Chang, G. H. Kim, I. G. Moon, and C. S. Choi, “Rare earth concentration in the primary Si crystal in rare earth added Al-21wt.%Si alloy," Scripta Materialia, vol. 39, no. 3, pp. 307314, Jul. 1998, doi: https://doi.org/10.1016/s1359-6462(98)00168-7 [Google Scholar]
  20. M. K. Surappa, “Aluminium matrix composites: Challenges and opportunities," Sadhana, vol. 28, no. 1-2, pp. 319-334, Feb. 2003, doi: https://doi.org/10.1007/bf02717141 [Google Scholar]
  21. N. Ahamad, A. Mohammad, Moti Lal Rinawa, Kishor Kumar Sadasivuni, and P. Gupta, “Correlation of structural and mechanical properties for Al-Al2O3-SiC hybrid metal matrix composites," Journal of Composite Materials, vol. 55, no. 23, pp. 3267-3280, Apr. 2021, doi: https://doi.org/10.1177/00219983211011537 [Google Scholar]
  22. K. Ponhan, P. Jiandon, S. Talangkun, and M. Kongpuang, “Effect of SiC content on mechanical and tribological performance of ADC14-P-SiC nanocomposites synthesized via ultrasonically assisted stir casting approach," Results in Engineering, vol. 27, p. 106355, Sep. 2025, doi: https://doi.org/10.1016/j.rineng.2025.106355 [Google Scholar]
  23. R. Ambigai and S. Prabhu, “Analyzing the Mechanical Properties and Characterization of Aluminium (ADC-14) Based Functionally Graded Materials (FGM)," Silicon, vol. 14, no. 6, pp. 2839-2850, Mar. 2021, doi: https://doi.org/10.1007/s12633-021-01050-2 [Google Scholar]
  24. K. Ponhan, P. Jiandon, S. Talangkun, and M. Kongpuang, “Effect of SiC content on mechanical and tribological performance of ADC14-P-SiC nanocomposites synthesized via ultrasonically assisted stir casting approach," Results in Engineering, vol. 27, Art. no. 106355, 2025, doi: https://doi.org/10.1016/j.rineng.2025.106355 [Google Scholar]
  25. W. Liu, W. Xiao, C. Xu, M. Liu, and C. Ma, “Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al-Si cast alloy," Materials Science and Engineering: A, vol. 693, pp. 93-100, May 2017, doi: https://doi.org/10.1016/j.msea.2017.03.097. [Google Scholar]
  26. Z. Shi, Q. WANG, Y. Shi, G. Zhao, and R. Zhang, “Microstructure and mechanical properties of Gd-modified A356 aluminum alloys," Journal of Rare Earths, vol. 33, no. 9, pp. 1004-1009, Sep. 2015, doi: https://doi.org/10.1016/s1002-0721(14)60518-4 [Google Scholar]
  27. Y. Sui, Q. Wang, T. Li, B. Yan, H. Jiang, and W. Ding, “Influence of Gd content on microstructure and mechanical properties of cast Al-12Si-4Cu-2Ni-0.8Mg alloys," Journal of Alloys and Compounds, vol. 644, pp. 228-235, Sep. 2015, doi: https://doi.org/10.1016/jja11com.2015.04.164 [Google Scholar]
  28. R. Jalal, S. Shihab, M. A. Alhadi, and M. Rasheed, “Spectral Numerical Algorithm for Solving Optimal Control Using Boubaker-Turki Operational Matrices," Journal of Physics: Conference Series, vol. 1660, no. 1, p. 012090, Nov. 2020, doi: https://doi.org/10.1088/1742-6596/1660/1/012090 [Google Scholar]
  29. N. Assoudi et al., “Comparative examination of the physical parameters of the sol gel produced compounds La0.5 Ag0. 1 Ca0.4MnO3 and La0.6Ca0.3AgO.1MnO3," Optical and Quantum Electronics, vol. 54, no. 9, Jul. 2022, doi: https://doi.org/10.1007/s11082-022-03927-x [Google Scholar]
  30. O. Alabdali, S. Shihab, M. Rasheed, and T. Rashid, “Orthogonal Boubaker-Turki polynomials algorithm for problems arising in engineering," 3RD INTERNATIONAL SCIENTIFIC CONFERENCE OF ALKAFEEL UNIVERSITY (ISCKU 2021), 2022, doi: https://doi.org/10.1063/5.0066860 [Google Scholar]
  31. M. Rasheed, O. Alabdali, S. Shihab, A. Rashid, and T. Rashid, “On the Solution of Nonlinear Equation for Photovoltaic Cell Using New Iterative Algorithms," Journal of Physics: Conference Series, vol. 1999, no. 1, p. 012078, Sep. 2021, doi: https://doi.org/10.1088/1742-6596/1999/1/012078 [Google Scholar]
  32. M. Rasheed, M. Nuhad Al-Darraji, S. Shihab, A. Rashid, and T. Rashid, “The numerical Calculations of Single-Diode Solar Cell Modeling Parameters,” Journal of Physics: Conference Series, vol. 1963, no. 1, p. 012058, Jul. 2021, doi: https://doi.Org/10.1088/1742-6596/1963/1/012058. [Google Scholar]
  33. M. Rasheed, S. Shihab, O. Alabdali, A. Rashid, and T. Rashid, “Finding Roots of Nonlinear Equation for Optoelectronic Device,” Journal of Physics: Conference Series, vol. 1999, no. 1, p. 012077, Sep. 2021, doi: https://doi.org/10.1088/1742-6596/1999/1/012077. [Google Scholar]
  34. A. Zubaidi, Lamyaa Mahdi Asaad, Iqbal Alshalal, and M. Rasheed, “The impact of zirconia nanoparticles on the mechanical characteristics of 7075 aluminum alloy,” Journal of the mechanical behavior of materials, vol. 32, no. 1, Jan. 2023, doi: https://doi.org/10.1515/jmbm-2022-0302. [Google Scholar]
  35. E. Kadri, K. Dhahri, R. Barillé, and M. Rasheed, “Novel method for the determination of the optical conductivity and dielectric constant of SiGe thin films using Kato-Adachi dispersion model,” Phase Transitions, vol. 94, no. 2, pp. 65-76, Feb. 2021, doi: https://doi.org/10.1080/01411594.2020.1832224. [Google Scholar]
  36. L. Huang et al., “The effects of in-situ ZrB2 particles and Gd on the solidification behavior and mechanical properties of AA6111 matrix composites,” Journal of Materials Research and Technology, vol. 15, pp. 278-291, Nov. 2021, doi: https://doi.org/10.1016/jjmrt.2021.08.025. [Google Scholar]
  37. A. M. H. Altameemi, T. A. Abu Bakar, S. Farahany, M. A. Sulong, and H. Ghandvar, “Effect of Gadolinium Addition on the Thermal, Microstructural, Mechanical, and Tribological Properties of Recycled Al-0.5Fe-0.5Si Alloy,” Journal of Materials Engineering and Performance, Nov. 2025, doi: https://doi.org/10.1007/s11665-025-12646-9. [Google Scholar]
  38. M. Okayasu, S. Wu, T. Hirayama, and Y.S. Lee, “Method for reducing aluminum alloy heat loss in high pressure die casting shot sleeves,” International Journal of Cast Metals Research, vol. 31, no. 5, pp. 308-316, Apr. 2018, doi: https://doi.org/10.1080/13640461.2018.1470370 [Google Scholar]
  39. M. Rasheed, I. Alshalal, A.A. Ashed, M.A. Sarhan, A.S. Jaber, Indones. J. Electr. Eng. Comput. Sci. 33 (2024) 653-660. https://doi.org/10.11591/ijeecs.v33.i1.pp653-660 [Google Scholar]
  40. M. Darraji, L. Saqban, T. Mutar, M. Rasheed, A. Hussein, J. Adv. Biotechnol. Exp. Ther. 6 (2022) 687. https://doi.org/10.5455/jabet.2022.d147 [Google Scholar]
  41. M. Rasheed, et al., J. Adv. Biotechnol. Exp. Ther. 6 (2023) 495. https://doi.org/10.5455/jabet.2023.d144 [Google Scholar]
  42. M. Al-Darraji, S. Jasim, O. Salah Aldeen, A. Ghasemian, M. Rasheed, Asian Pac. J. Cancer Prev. 23 (2022) 3437-3442. https://doi.org/10.31557/apjcp.2022.23.10.3437 [Google Scholar]
  43. R. Jalal, S. Shihab, M.A. Alhadi, M. Rasheed, J. Phys.: Conf. Ser. 1660 (2020) 012090. https://doi.org/10.1088/1742-6596/1660/1/012090 [Google Scholar]
  44. H.K. Aity, E. Dhahri, M. Rasheed, Ceram. Int. 50(24) Part B (2024) 54666-54687. https://doi.org/10.1016/j.ceramint.2024.10.324 [Google Scholar]
  45. T. Rashid, M.M. Mokji, M. Rasheed, 54 J. Opt. (2024) 3671-3683.https://doi.org/10.1007/s12596-024-02080-w [Google Scholar]
  46. T. Saidani, M. Rasheed, I. Alshalal, A.A. Rashed, M.A. Sarhan, R. Barillé, Res. Eng. Struct. Mater. 10(2) (2023) 743-770. https://doi.org/10.17515/resm2023.21ma0922rs [Google Scholar]
  47. F. Boudou, A. Guendouzi, A. Belkredar, M. Rasheed, Not. Sci. Biol. 16(2) (2024) 13837. https://doi.org/10.55779/nsb16211837 [Google Scholar]
  48. S. Shihab, M. Rasheed, O. Alabdali, A.A. Abdulrahman, J. Phys.: Conf. Ser. 1879 (2021) 022120. https://doi.org/10.1088/1742-6596/1879/2/022120 [Google Scholar]
  49. A.J. Hussein, M.N. Al-Darraji, M. Rasheed, M.A. Sarhan, IOP Conf. Ser.: Earth Environ. Sci. 1262 (2023) 022005. https://doi.org/10.1088/1755-1315/1262/2/022005 [Google Scholar]
  50. A.J. Hussein, M.N. Al-Darraji, M. Rasheed, IOP Conf. Ser.: Earth Environ. Sci. 1262(2) (2023) 022007. https://doi.org/10.1088/1755-1315/1262/2/022007 [Google Scholar]
  51. M. Sellam, M. Rasheed, S. Azizi, T. Saidani, Ceram. Int. 50(12) (2024) 20917-20935. https://doi.org/10.1016/j.ceramint.2024.03.094 [Google Scholar]
  52. M. Rasheed, M.N. Al-Darraji, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1963(1) (2021) 012058. https://doi.org/10.1088/1742-6596/1963/1/012058 [Google Scholar]
  53. M. Rasheed, M.N. Al-Darraji, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1963(1) (2021) 012059. https://doi.org/10.1088/1742-6596/1963/1/012059 [Google Scholar]
  54. M. Rasheed, S. Shihab, O. Alabdali, A. Rashid, T. Rashid, J. Phys .: Conf. Ser. 1999 (2021) 012077. https://doi.org/10.1088/1742-6596/1999/1/012077 [Google Scholar]
  55. M. Rasheed, O. Alabdali, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1999(1) (2021) 012078. https://doi.org/10.1088/1742-6596/1999/1/012078 [Google Scholar]
  56. O. Alabdali, S. Shihab, M. Rasheed, T. Rashid, AIP Conf . Proc. 2386(1) (2022) 050019. https://doi.org/10.1063/5.0066860 [Google Scholar]
  57. N. Assoudi, et al., Opt. Quantum Electron. 54(9) (2022) 3927. https://doi.org/10.1007/s11082-022-03927-x [Google Scholar]
  58. A.H. Ali, A.S. Jaber, M.T. Yaseen, M. Rasheed, O. Bazighifan, T.A. Nofal, Complexity 2023 9367638 (2022) 1-9. https://doi.org/10.1155/2023/9852348 [Google Scholar]
  59. D. Bouras, M. Fellah, R. Barille, M.A. Samad, M. Rasheed, M.A. Alreshidi, Opt. Quantum Electron. 56(104) (2023) 5778. https://doi.org/10.1007/s11082-023-05778-6 [Google Scholar]
  60. I. Alshalal, H.M.I. Al-Zuhairi, A.A. Abtan, M. Rasheed, M.K. Asmail, J. Mech. Behav. Mater. 32(1) (2023). https://doi.org/10.1515/jmbm-2022-0280 [Google Scholar]
  61. E. Kadri, K. Dhahri, R. Barillé, M. Rasheed, Phase Transit. 94(2) (2021) 65-76. https://doi.org/10.1080/01411594.2020.1832224 [Google Scholar]
  62. A. Keziz, M. Heraiz, F. Sahnoune, M. Rasheed, Ceram. Int. 49(20) (2023) 32989-33003. https://doi.org/10.1016/j.ceramint.2023.07.275 [Google Scholar]
  63. M. Rasheed, et al., J. Phys.: Conf. Ser. 1999(1) (2021) 012080. https://doi.org/10.1088/1742-6596/1999/1/012080 [Google Scholar]
  64. M. Enneffatia, M. Rasheed, B. Louatia, K. Guidaraa, S. Shihab, R. Barillé, J.Phys.: Conf. Ser. 1795(1) (2021) 012050. https://doi.org/10.1088/1742-6596/1795/1/012050 [Google Scholar]
  65. M. Rasheed, O.Y. Mohammed, S. Shihab, A. Al-Adili, J. Phys.: Conf. Ser. 1795(1) (2021) 012043. https://doi.org/10.1088/1742-6596/1795/1/012043 [Google Scholar]
  66. S. Shihab, M. Rasheed, O. Alabdali, A.A. Abdulrahman, J. Phys.: Conf. Ser. 1879(2) (2021) 022120. https://doi.org/10.1088/1742-6596/1879/2/022120 [Google Scholar]
  67. A. Zubaidi, L.M. Asaad, I. Alshalal, M. Rasheed, J. Mech. Behav. Mater. 32(1) (2023). https://doi.org/10.1515/jmbm-2022-0302 [Google Scholar]
  68. M. Ismael, T. Rashid, M.A. Sarhan, M. Rasheed, I.M. Sala, Eureka Phys. Eng. 4 (2023) 29-39. https://doi.org/10.21303/2461-4262.2023.002770 [Google Scholar]
  69. H. K. Aity, E. Dhahri, M. Rasheed, Ceram. Int. (2024). https://doi.org/10.1016/j.ceramint.2024.10.324 [Google Scholar]
  70. I. M. Mohammed, M. Rasheed, AIP Conf. Proc. 3321 (2025) 020026. https://doi.org/10.1063/5.0289719 [Google Scholar]
  71. F. Boudou, A. Belkredar, A. Berkane, M. Rasheed, Not. Sci. Biol. 17(2) (2025) 12183. https://doi.org/10.55779/nsb17212183 [Google Scholar]
  72. F. Boudou, et al., Not. Sci. Biol. 17(3) (2025) 12593. https://doi.org/10.55779/nsb17312593 [Google Scholar]
  73. R.S. Mahmood, et al., J. Mech. Behav. Mater. 34 (2025). https://doi.org/10.1515/jmbm-2025-0040 [Google Scholar]
  74. T. Rashid, M.M. Mokji, M. Rasheed, J. Mech. Behav. Mater. 34 (2025). https://doi.org/10.1515/jmbm-2025-0074 [Google Scholar]
  75. M. Rasheed, M.N. Mohammedali, F.A. Sadiq, M.A. Sarhan, T. Saidani, J. Opt. 54 (2024) 34903504. https://doi.org/10.1007/s12596-024-01928-5 [Google Scholar]
  76. A. I. A. Ali, M. Rasheed, Effect of changing magnetite percentage on structural and magnetic properties of cobalt ferrite prepared by the sol-gel method, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 277-287. https://doi.org/10.56053/10.s.277. [Google Scholar]
  77. A. Khaleefah, M. Rasheed, Sol-gel-derived mullite nanoparticles: Structural and antibacterial insights, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 289-300. https://doi.org/10.56053/10.s.289. [Google Scholar]
  78. Z. S. Ahmed, M. Rasheed, H. S. Ahmed, Optimizing NiO nanoparticle properties for antibacterial applications via temperature-driven structural modification, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 329-342. https://doi.org/10.56053/10.s.329. [Google Scholar]
  79. Z. S. Ahmed, M. Rasheed, H. S. Ahmed, Enhancing a-Bi2O3 nanoparticle crystallinity and antibacterial functionality through controlled calcination, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 343-356. https://doi.org/10.56053/10.s.343. [Google Scholar]
  80. A. I. A. Ali, M. Rasheed, Effect of sintering temperature on electrical and structural properties for spinel ferrites prepared by sol-gel method, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 239-256. https://doi.org/10.56053/10.s.239 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.