EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 374 (2026) EPJ Web Conf., 374 (2026) 04003 References
Open Access
Issue
EPJ Web Conf.
Volume 374, 2026
1st International Conference on Electronic, Optical Devices and Intelligent Systems (ICEODIS 2026)
Article Number 04003
Number of page(s) 9
Section Materials Science, Nanotechnology and Mechanical Engineering
DOI https://doi.org/10.1051/epjconf/202637404003
Published online 24 June 2026
  1. Wahab and Masaaki Sakano, “Experimental study of corrosion fatigue behaviour of welded steel structures,” vol. 118, no. 1-3, pp. 116-121, Dec. 2001, doi: https://doi.org/10.1016/s0924-0136(01)00902-5 [Google Scholar]
  2. E. Surojo et al., “Effect of Welding Parameter on the Corrosion Rate of Underwater Wet Welded SS400 Low Carbon Steel,” Applied Sciences, vol. 10, no. 17, p. 5843, Aug. 2020, doi: https://doi.org/10.3390/app10175843. [Google Scholar]
  3. Y. Zong and C.-M. Liu, “Microstructure, Mechanical Properties, and Corrosion Behavior of Ultra-Low Carbon Bainite Steel with Different Niobium Content,” Materials, vol. 14, no. 2, p. 311, Jan. 2021, doi: https://doi.org/10.3390/ma14020311. [Google Scholar]
  4. Lina. M.K, Sami. I, Jafar, Israa.a.aziz , Texture and surface morphology influence of A106 carbon steel pipe on mechanical properties and corrosion resistance after welding process, Welding International, 38(7): 117. doi: https://doi.org/10.1080/09507116.2024.2409814. [Google Scholar]
  5. Kumar, R., Singh, J., & Sharma, A. (2023). Effect of welding parameters on corrosion resistance of low carbon steel weldments. Materials Today: Proceedings, Vol. 74, Part 6, pp. 3501-3507. doi: https://doi.org/10.1016/j.matpr.2023.03.231. [Google Scholar]
  6. Hussain, A., Khan, Z.A., & Mir, N.A. (2022). Influence of electrode type and welding current on corrosion behavior of low carbon steel in saline media. Journal of Materials Research and Technology, Vol. 19, pp. 2328-2337. doi: https://doi.org/10.1016/j.jmrt.2022.06.067. [Google Scholar]
  7. Bandiwar, G.P., & Khanna, A.S. (2021). Evaluation of corrosion behavior of low carbon steel welds produced by SMAW under varying heat input. Engineering Failure Analysis, Vol. 127, 105511. doi: https://doi.org/10.1016/j.engfailanal.2021.105511. [Google Scholar]
  8. Chen, Y., Lin, Z., & Zhang, W. (2020). Effects of welding heat input on microstructure and corrosion resistance of low carbon steel. Corrosion Science, Vol. 168, 108602. doi: https://doi.org/10.1016/j.corsci.2020.108602. [Google Scholar]
  9. Siddharth, M., & Raghukandan, K. (2023). Optimization of welding parameters for improved corrosion resistance using Taguchi-Grey approach. Materials Today: Proceedings, Vol. 75, Part 1, pp. 1043-1050. doi: https://doi.org/10.1016/j.matpr.2023.04.173. [Google Scholar]
  10. P. Kah, R. Suoranta, and J. Martikainen, “Advanced gas metal arc welding processes,” The International Journal of Advanced Manufacturing Technology, vol. 67, no. 1-4, pp. 655-674, Sep. 2012, doi: https://doi.org/10.1007/s00170-012-4513-5. [Google Scholar]
  11. C.-C. Yin et al., “Local Corrosion Behaviors in the Coarse-Grained Heat-Affected Zone in a Newly Developed Zr-Ti-Al-RE Deoxidized High-Strength Low-Alloy Steel,” Materials, vol. 16, no. 2, pp. 876876, Jan. 2023, doi: https://doi.org/10.3390/ma16020876. [Google Scholar]
  12. Z. Li, Z. Fu, L. Wei, and B. Ji, “Effect of heat-affected zone on electrochemical corrosion behavior of welded joint with multi-metallographic structure zone,” Corrosion Science, vol. 251, p. 112935, Jul. 2025, doi: https://doi.org/10.1016/j.corsci.2025.112935. [Google Scholar]
  13. T. Domański, W. Piekarska, M. Kubiak, and Z. Saternus, “Determination of the Final Microstructure during Processing Carbon Steel Hardening,” Procedia Engineering, vol. 136, pp. 77-81, 2016, doi: https://doi.org/10.1016/j.proeng.2016.01.177. [Google Scholar]
  14. F. Khoshnaw, Igor Krivtsun, and Volodymyr Korzhyk, “Arc welding methods,” Elsevier eBooks, pp. 37-71, Jan. 2023, doi: https://doi.org/10.1016/b978-0-323-90552-7.00004-3. [Google Scholar]
  15. I. A. Newcomb, “Time-Temperature-Transformation (TTT) diagram of a carbon fiber epoxy prepreg,” Polymer Testing, vol. 77, p. 105859, Aug. 2019, doi: https://doi.org/10.1016/j.polymertesting.2019.04.006. [Google Scholar]
  16. S. M. C. van Bohemen, “Relationship between acoustic emission energy and the kinetics of martensite formation in plain carbon steels,” Philosophical Magazine, vol. 95, no. 2, pp. 210-223, Dec. 2014, doi: https://doi.org/10.1080/14786435.2014.994574. [Google Scholar]
  17. Z. Boumerzoug, C. Derfouf, and T. Baudin, “Effect of Welding on Microstructure and Mechanical Properties of an Industrial Low Carbon Steel,” Engineering, vol. 02, no. 07, pp. 502-506, 2010, doi: https://doi.org/10.4236/eng.2010.27066. [Google Scholar]
  18. V. Shibe and V. Chawla, “Characterization of Fe-C-Cr Based Hardfacing Alloys,” Transactions of the Indian Institute of Metals, vol. 71, no. 9, pp. 22112220, Jun. 2018, doi: https://doi.org/10.1007/s12666-018-1352-6. [Google Scholar]
  19. J. Liu, J. Wang, F. Hu, K. Fu, Z. Zhang, and Y. Wu, “Effects of Ti/N Ratio on Coarse-Grain Heat-Affected Zone Microstructure Evolution and Low-Temperature Impact Toughness of High Heat Input Welding Steel,” Coatings, vol. 13, no. 8, p. 1347, Jul. 2023, doi: https://doi.org/10.3390/coatings13081347. [Google Scholar]
  20. M. Rasheed, I. Alshalal, A.A. Ashed, M.A. Sarhan, A.S. Jaber, Indones. J. Electr. Eng. Comput. Sci. 33 (2024) 653-660. doi: https://doi.org/10.11591/ijeecs.v33.i1.pp653-660 [Google Scholar]
  21. M. Darraji, L. Saqban, T. Mutar, M. Rasheed, A. Hussein, J. Adv. Biotechnol. Exp. Ther. 6 (2022) 687. doi: https://doi.org/10.5455/jabet.2022.d147 [Google Scholar]
  22. M. Rasheed, et al., J. Adv. Biotechnol. Exp. Ther. 6 (2023) 495. doi: https://doi.org/10.5455/jabet.2023.d144 [Google Scholar]
  23. M. Al-Darraji, S. Jasim, O. Salah Aldeen, A. Ghasemian, M. Rasheed, Asian Pac. J. Cancer Prev. 23 (2022) 3437-3442. doi: https://doi.org/10.31557/apjcp.2022.23.10.3437 [Google Scholar]
  24. R. Jalal, S. Shihab, M.A. Alhadi, M. Rasheed, J. Phys.: Conf. Ser. 1660 (2020) 012090. doi: https://doi.org/10.1088/1742-6596/1660/1/012090 [Google Scholar]
  25. H.K. Aity, E. Dhahri, M. Rasheed, Ceram. Int. 50(24) Part B (2024) 54666-54687. doi: https://doi.org/10.1016/j.ceramint.2024.10.324 [Google Scholar]
  26. T. Rashid, M.M. Mokji, M. Rasheed, 54 J. Opt. (2024) 3671-3683. doi: https://doi.org/10.1007/s12596-024-02080-w [Google Scholar]
  27. T. Saidani, M. Rasheed, I. Alshalal, A.A. Rashed, M.A. Sarhan, R. Barillé, Res. Eng. Struct. Mater. 10(2) (2023) 743-770. doi: https://doi.org/10.17515/resm2023.21ma0922rs [Google Scholar]
  28. F. Boudou, A. Guendouzi, A. Belkredar, M. Rasheed, Not. Sci. Biol. 16(2) (2024) 13837. doi: https://doi.org/10.55779/nsb16211837 [Google Scholar]
  29. S. Shihab, M. Rasheed, O. Alabdali, A.A. Abdulrahman, J. Phys.: Conf. Ser. 1879 (2021) 022120. doi: https://doi.org/10.1088/1742-6596/1879/2/022120 [Google Scholar]
  30. A. J. Hussein, M.N. Al-Darraji, M. Rasheed, M.A. Sarhan, IOP Conf . Ser.: Earth Environ. Sci. 1262 (2023) 022005. doi: https://doi.org/10.1088/1755-1315/1262/2/022005 [Google Scholar]
  31. A. J. Hussein, M.N. Al-Darraji, M. Rasheed, IOP Conf . Ser.: Earth Environ. Sci. 1262(2) (2023) 022007. doi: https://doi.org/10.1088/1755-1315/1262/2/022007 [Google Scholar]
  32. M. Sellam, M. Rasheed, S. Azizi, T. Saidani, Ceram. Int. 50(12) (2024) 20917-20935. doi: https://doi.org/10.1016/j.ceramint.2024.03.094 [Google Scholar]
  33. M. Rasheed, M.N. Al-Darraji, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1963(1) (2021) 012058. doi: https://doi.org/10.1088/1742-6596/1963/1/012058 [Google Scholar]
  34. M. Rasheed, M.N. Al-Darraji, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1963(1) (2021) 012059. doi: https://doi.org/10.1088/1742-6596/1963/1/012059 [Google Scholar]
  35. M. Rasheed, S. Shihab, O. Alabdali, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1999 (2021) 012077. doi: https://doi.org/10.1088/1742-6596/1999/1/012077 [Google Scholar]
  36. M. Rasheed, O. Alabdali, S. Shihab, A. Rashid, T. Rashid, J. Phys.: Conf. Ser. 1999(1) (2021) 012078. doi: https://doi.org/10.1088/1742-6596/1999/1/012078 [Google Scholar]
  37. O. Alabdali, S. Shihab, M. Rasheed, T. Rashid, AIP Conf . Proc. 2386(1) (2022) 050019. doi: https://doi.org/10.1063/5.0066860 [Google Scholar]
  38. N. Assoudi, et al., Opt. Quantum Electron. 54(9) (2022) 3927. doi: https://doi.org/10.1007/s11082-022-03927-x [Google Scholar]
  39. A.H. Ali, A.S. Jaber, M.T. Yaseen, M. Rasheed, O. Bazighifan, T.A. Nofal, Complexity 2023 9367638 (2022) 1-9. doi: https://doi.org/10.1155/2023/9852348 [Google Scholar]
  40. D. Bouras, M. Fellah, R. Barille, M.A. Samad, M. Rasheed, M.A. Alreshidi, Opt. Quantum Electron. 56(104) (2023) 5778. doi: https://doi.org/10.1007/s11082-023-05778-6. [Google Scholar]
  41. I. Alshalal, H.M.I. Al-Zuhairi, A.A. Abtan, M. Rasheed, M.K. Asmail, J. Mech. Behav. Mater. 32(1) (2023). doi: https://doi.org/10.1515/jmbm-2022-0280. [Google Scholar]
  42. E. Kadri, K. Dhahri, R. Barillé, M. Rasheed, Phase Transit. 94(2) (2021) 65-76. doi: https://doi.org/10.1080/01411594.2020.1832224. [Google Scholar]
  43. A. Keziz, M. Heraiz, F. Sahnoune, M. Rasheed, Ceram. Int. 49(20) (2023) 32989-33003. doi: https://doi.Org/10.1016/j.ceramint.2023.07.275. [Google Scholar]
  44. M. Rasheed, et al., J. Phys.: Conf. Ser. 1999(1) (2021) 012080. doi: https://doi.org/10.1088/1742-6596/1999/1/012080 [Google Scholar]
  45. M. Enneffatia, M. Rasheed, B. Louatia, K. Guidaraa, S. Shihab, R. Barillé, J. Phys.: Conf. Ser. 1795(1) (2021) 012050. doi: https://doi.org/10.1088/1742-6596/1795/1/012050 [Google Scholar]
  46. M. Rasheed, O.Y. Mohammed, S. Shihab, A. Al-Adili, J. Phys.: Conf. Ser. 1795(1) (2021) 012043. doi: https://doi.org/10.1088/1742-6596/1795/1/012043 [Google Scholar]
  47. S. Shihab, M. Rasheed, O. Alabdali, A.A. Abdulrahman, J. Phys.: Conf. Ser. 1879(2) (2021) 022120. doi: https://doi.org/10.1088/1742-6596/1879/2/022120 [Google Scholar]
  48. A. Zubaidi, L.M. Asaad, I. Alshalal, M. Rasheed, J. Mech. Behav. Mater. 32(1) (2023). doi: https://doi.org/10.1515/jmbm-2022-0302. [Google Scholar]
  49. M. Ismael, T. Rashid, M.A. Sarhan, M. Rasheed, I.M. Sala, Eureka Phys. Eng. 4 (2023) 29-39. doi: https://doi.org/10.21303/2461-4262.2023.002770 [Google Scholar]
  50. H. K. Aity, E. Dhahri, M. Rasheed, Ceram. Int. (2024). doi: https://doi.org/10.1016/j.ceramint.2024.10.324 [Google Scholar]
  51. M. Mohammed, M. Rasheed, AIP Conf. Proc. 3321 (2025) 020026. doi: https://doi.org/10.1063/5.0289719. [Google Scholar]
  52. Boudou, A. Belkredar, A. Berkane, M. Rasheed, Not. Sci. Biol. 17(2) (2025) 12183. doi: https://doi.org/10.55779/nsb17212183. [Google Scholar]
  53. Boudou, et al., Not. Sci. Biol. 17(3) (2025) 12593. doi: https://doi.org/10.55779/nsb17312593. [Google Scholar]
  54. R.S. Mahmood, et al., J. Mech. Behav. Mater. 34 (2025). doi: https://doi.org/10.1515/jmbm-2025-0040 [Google Scholar]
  55. T. Rashid, M.M. Mokji, M. Rasheed, J. Mech. Behav. Mater. 34 (2025). doi: https://doi.org/10.1515/jmbm-2025-0074 [Google Scholar]
  56. M. Rasheed, M.N. Mohammedali, F.A. Sadiq, M.A. Sarhan, T. Saidani, J. Opt. 54 (2024) 3490-3504. doi: https://doi.org/10.1007/s12596-024-01928-5 [Google Scholar]
  57. A. A. Ali, M. Rasheed, Effect of changing magnetite percentage on structural and magnetic properties of cobalt ferrite prepared by the sol-gel method, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 277-287. doi: https://doi.org/10.56053/10.s.277. [Google Scholar]
  58. Khaleefah, M. RASHEED, Sol-gel-derived mullite nanoparticles: Structural and antibacterial insights, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 289-300. doi: https://doi.org/10.56053/10.s.289. [Google Scholar]
  59. Z. S. Ahmed, M. Rasheed, H. S. Ahmed, Optimizing NiO nanoparticle properties for antibacterial applications via temperature-driven structural modification, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 329-342. doi: https://doi.org/10.56053/10.s.329. [Google Scholar]
  60. Z. S. Ahmed, M. Rasheed, H. S. Ahmed, Enhancing a-Bi2O3 nanoparticle crystallinity and antibacterial functionality through controlled calcination, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 343-356. doi: https://doi.org/10.56053/10.s.343. [Google Scholar]
  61. A. I. A. Ali, M. Rasheed, Effect of sintering temperature on electrical and structural properties for spinel ferrites prepared by sol-gel method, Experimental and Theoretical NANOTECHNOLOGY, 10 (2026) 239-256. doi: https://doi.org/10.56053/10s239. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.