EPJ Web of Conferences
Volume 26, 2012DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||31 August 2012|
The effects of axial length on the fracture and fragmentation of expanding rings
1 Institute of Shock Physics, Imperial College London, Prince Consort Road, London, SW7 2BP, UK
2 Institute of Problems of Chemical Physics, Russian Academy of Sciences, Chernogolovka, Moscow Region 142432, Russia
a e-mail: firstname.lastname@example.org
Rings of Ti-6Al-4V with aspect ratios (wall thickness:axial length) of 1 : 1, 1 : 2 and 1 : 4 have been expanded to failure at radial strain rates εr ∼ 1 × 104 s−1 using 4340 (EN24T) steel and Cu-ETP cylindrical drivers containing a column of RDX. Expansion velocity was measured using VISAR enabling calculation of the stress-strain history of the ring alongside fragment recovery with up to 98% original ring mass recovered. Using the recovered samples average fragment length and mass and final strain have been measured along with analysis of the fracture sites to determine the active failure mechanisms. Perfect rings (aspect ratio 1 : 1) were found to undergo necking before failure, whereas the longer rings failed though ductile tensile cracking at 45∘ to the radius. This data is then compared with finite element analysis results.
© Owned by the authors, published by EDP Sciences, 2012
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.