Issue |
EPJ Web of Conferences
Volume 26, 2012
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
---|---|---|
Article Number | 04011 | |
Number of page(s) | 4 | |
Section | Modeling and Numerical Simulation | |
DOI | https://doi.org/10.1051/epjconf/20122604011 | |
Published online | 31 August 2012 |
https://doi.org/10.1051/epjconf/20122604011
Determination of Johnson-holmquist constitutive model parameters for fused silica
1 University of Cassino, DiMSAT, Cassino, Italy
2 MBDA Italia Spa, Bacoli, Italy
a e-mail: nbonora@unicas.it
Johnson-Holmquist constitutive model parameters for Fused Silica under dynamic conditions were determined by means of an inverse calibration technique. The identification of the parameters was performed with an multi-object optimizer using experimental data generated by two different validation tests: Taylor Cylinder Impact tests and Drop Weight tests, with impact velocity and strain rate ranging from 1 to 100 m/s and from 102 to 104 s−1, respectively. The validity of the parameters set determined in this way was verified comparing numerical predictions and experimental results for an independent designed test, given by a fused silica tile impacted at prescribed velocity by a steel sphere.
© Owned by the authors, published by EDP Sciences, 2012
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.