Application of Taguchi approach to optimize friction stir welding parameters of polyethylene
EPJ Web of Conferences, 6 (2010) 07003
Published online: 2010-06-10
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of process parameters on the weld quality of 3D printed PLA‐CF sheets by FSW process
Nergizhan Anac, Oğuz Kocar, Sathish Kumar Palaniappan, Furkan Parmaksiz, Emel Mutlu, Sanjay Mavinkere Rangappa and Suchart SiengchinPolymer Composites (2025)
https://doi.org/10.1002/pc.29637
Thermal modeling of friction stir welding of thick high-density polyethylene plates
A. Alhourani, J. Sheikh-Ahmad, F. Almaskari, K. Khan, S. Deveci and I. BarsoumJournal of Materials Research and Technology 28 4186 (2024)
https://doi.org/10.1016/j.jmrt.2024.01.044
A New Approach in Part Design for Friction Stir Welding of 3D-Printed Parts with Different Infill Ratios and Colors
Oğuz Koçar, Nergizhan Anaç and Erhan BaysalPolymers 16 (13) 1790 (2024)
https://doi.org/10.3390/polym16131790
Recent trends in parametric influence and microstructural analysis of friction stir welding for polymer composites
Soni Kumari, Din Bandhu, Amit Muchhadiya and Kumar AbhishekAdvances in Materials and Processing Technologies 1 (2023)
https://doi.org/10.1080/2374068X.2023.2193447
The mechanical properties of dissimilar/similar polymer materials joined by friction stir welding
Nergizhan AnaçHeliyon 9 (7) e17627 (2023)
https://doi.org/10.1016/j.heliyon.2023.e17627
A Comprehensive Review on Friction Stir Welding of High-Density Polyethylene
Mustafa Yildiz, Fahrettin Ozturk and Jamal Sheikh-AhmadArabian Journal for Science and Engineering 48 (9) 11167 (2023)
https://doi.org/10.1007/s13369-023-08048-5
Investigation of the effects of welding variables on the welding defects of the friction stir welded high density polyethylene sheets
Mustafa Kemal BiliciJournal of Elastomers & Plastics 54 (3) 457 (2022)
https://doi.org/10.1177/00952443211058845
Effects of Welding Process Conditions on Friction Stir Welding of Polymer Composites: A Review
Ramesh RudrapatiComposites Part C: Open Access 100269 (2022)
https://doi.org/10.1016/j.jcomc.2022.100269
Joining of Polyethylene Using a Non-Conventional Friction Stir Welding Tool
Miguel A. R. Pereira, Ivan Galvão, José Domingos Costa, Rui M. Leal and Ana M. AmaroMaterials 15 (21) 7639 (2022)
https://doi.org/10.3390/ma15217639
Joining of Fibre-Reinforced Thermoplastic Polymer Composites by Friction Stir Welding—A Review
Miguel A. R. Pereira, Ivan Galvão, José Domingos Costa, Ana M. Amaro and Rui M. LealApplied Sciences 12 (5) 2744 (2022)
https://doi.org/10.3390/app12052744
Effect of process temperatures on material flow and weld quality in the friction stir welding of high density polyethylene
J.Y. Sheikh-Ahmad, Suleyman Deveci, Fahad Almaskari and Razi UR. RehmanJournal of Materials Research and Technology 18 1692 (2022)
https://doi.org/10.1016/j.jmrt.2022.03.082
1 (2022)
https://doi.org/10.1109/ASET53988.2022.9735017
Multi sensor based strategies for accurate prediction of friction stir welding of polycarbonate sheets
Santosh K Sahu, Debasish Mishra, Kamal Pal and Surjya K PalProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (17) 3252 (2021)
https://doi.org/10.1177/0954406220960772
A Review on Advancement in Friction Stir Welding Considering the Tool and Material Parameters
Vijay Kumar Mahakur, Krushna Gouda, Promod Kumar Patowari and Sumit BhowmikArabian Journal for Science and Engineering 46 (8) 7681 (2021)
https://doi.org/10.1007/s13369-021-05524-8
A Comprehensive Review on Optimal Welding Conditions for Friction Stir Welding of Thermoplastic Polymers and Their Composites
Syed Haris Iftikhar, Abdel-Hamid Ismail Mourad, Jamal Sheikh-Ahmad, Fahad Almaskari and S. VincentPolymers 13 (8) 1208 (2021)
https://doi.org/10.3390/polym13081208
Optimizing process parameters for joint strength efficiency improvement in friction stir welding of polycarbonate sheets
S.K. Sahu, D. Mishra and K. PalMaterialwissenschaft und Werkstofftechnik 52 (7) 739 (2021)
https://doi.org/10.1002/mawe.202000205
Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene
Razi Ur Rehman, Jamal Sheikh-Ahmad and Suleyman DeveciThe International Journal of Advanced Manufacturing Technology 117 (1-2) 455 (2021)
https://doi.org/10.1007/s00170-021-07740-w
Effect of Friction Stir Welding Techniques and Parameters on Polymers Joint Efficiency—A Critical Review
Miguel A. R. Pereira, Ana M. Amaro, Paulo N. B. Reis and Altino LoureiroPolymers 13 (13) 2056 (2021)
https://doi.org/10.3390/polym13132056
Optimization of transversal flow stress and strain and weld seam microstructure analysis in butt-HDPE friction stir welded plates
Khaled Hamrouni, Mohamed-Ali Rezgui, Ali Trabelsi, Zoltan Kiss and Rachid NasriMechanics & Industry 21 (5) 501 (2020)
https://doi.org/10.1051/meca/2020047
1 (2020)
https://doi.org/10.1109/ASET48392.2020.9118183
Investigation on Mechanical Behavior of Friction Stir Welded Nylon-6 Using Temperature Signatures
Santosh K. Sahu, Raju P. Mahto and Kamal PalJournal of Materials Engineering and Performance 29 (8) 5238 (2020)
https://doi.org/10.1007/s11665-020-05030-2
Manufacturing Parameters, Materials, and Welds Properties of Butt Friction Stir Welded Joints–Overview
Aleksandra Laska and Marek SzkodoMaterials 13 (21) 4940 (2020)
https://doi.org/10.3390/ma13214940
Solid State Joining of Thin Hybrid Sandwiches Made of Steel and Polymer: a Feasibility Study
Gianluca Buffa, Davide Campanella, Archimede Forcellese, Livan Fratini and Michela SimonciniProcedia Manufacturing 47 400 (2020)
https://doi.org/10.1016/j.promfg.2020.04.315
On the mechanical characteristics of friction stir welded dissimilar polymers: statistical analysis of the processing parameters and morphological investigations of the weld joint
Sunpreet Singh, Gurminder Singh, Chander Prakash and Ranvijay KumarJournal of the Brazilian Society of Mechanical Sciences and Engineering 42 (4) (2020)
https://doi.org/10.1007/s40430-020-2227-4
Friction stir welding/processing of polymers and polymer matrix composites
Yongxian Huang, Xiangchen Meng, Yuming Xie, et al.Composites Part A: Applied Science and Manufacturing 105 235 (2018)
https://doi.org/10.1016/j.compositesa.2017.12.005
Parameter optimisation of friction stir welded dissimilar polymers joints
Shayan Eslami, M. A. V. de Figueiredo, Paulo J. Tavares and P. M. G. P. MoreiraThe International Journal of Advanced Manufacturing Technology 94 (5-8) 1759 (2018)
https://doi.org/10.1007/s00170-017-0043-5
Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets
H. Aghajani Derazkola and Abdolreza SimchiScience and Technology of Welding and Joining 23 (3) 209 (2018)
https://doi.org/10.1080/13621718.2017.1364896
Mechanical and thermal properties of friction-stir welded joints of high density polyethylene using a non-rotational shoulder tool
Mirley Moreno-Moreno, Yorledis Macea Romero, Habib Rodríguez Zambrano, et al.The International Journal of Advanced Manufacturing Technology 97 (5-8) 2489 (2018)
https://doi.org/10.1007/s00170-018-2102-y
Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets
Hamed Aghajani Derazkola and Abdolreza SimchiJournal of Manufacturing Processes 34 412 (2018)
https://doi.org/10.1016/j.jmapro.2018.06.015
Friction stir welding tooling for polymers: review and prospects
Shayan Eslami, Paulo J. Tavares and P. M. G. P. MoreiraThe International Journal of Advanced Manufacturing Technology 89 (5-8) 1677 (2017)
https://doi.org/10.1007/s00170-016-9205-0
Application and exploration of friction stir welding/processing in plastics industry
Jicheng Gao, Xixi Cui, Cheng Liu and Yifu ShenMaterials Science and Technology 33 (10) 1145 (2017)
https://doi.org/10.1080/02670836.2016.1276251
Termoplastiklerin Sürtünme Karıştırma Kaynağı ile Birleştirilmesinde Kullanılan Yöntemler
İdris KARAGÖZ and Mustafa ÖKSÜZÇukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 31 (ÖS1) 19 (2016)
https://doi.org/10.21605/cukurovaummfd.311197
Welding parameters and joint strength optimization during friction stir welding of high density polyethylene (HDPE) using the Taguchi method
Aydın Ülker, Sami Sayer and Vural CeyhunMaterials Testing 58 (5) 423 (2016)
https://doi.org/10.3139/120.110874
Mechanical properties of friction-stir-welded polyamide sheets
Imad M. Husain, Raed K. Salim, Taher Azdast, Soran Hasanifard, Sajjad M. Shishavan and Richard Eungkee LeeInternational Journal of Mechanical and Materials Engineering 10 (1) (2015)
https://doi.org/10.1186/s40712-015-0047-6
RETRACTED ARTICLE: Finite element simulation of material flow in friction stir process of nylon 6 and nylon 6/MWCNTs composite
Reza Farshbaf Zinati and Zude ZhouCogent Engineering 2 (1) 1 (2015)
https://doi.org/10.1080/23311916.2015.1048098
Shoulder design developments for FSW lap joints of dissimilar polymers
Shayan Eslami, Tiago Ramos, Paulo J. Tavares and P.M.G.P. MoreiraJournal of Manufacturing Processes 20 15 (2015)
https://doi.org/10.1016/j.jmapro.2015.09.013
Effect of Friction Stir Welding Parameters with Newly Developed Tool for Lap Joint of Dissimilar Polymers
Shayan Eslami, Tiago Ramos, Paulo J. Tavares and P.M.G.P. MoreiraProcedia Engineering 114 199 (2015)
https://doi.org/10.1016/j.proeng.2015.08.059
Friction stir welding of thermoplastics using a newly designed tool
Mehdi Pirizadeh, Taher Azdast, Samrand Rash Ahmadi, Sajjad Mamaghani Shishavan and Arvin BagheriMaterials & Design (1980-2015) 54 342 (2014)
https://doi.org/10.1016/j.matdes.2013.08.053
Material flow and thermo-mechanical conditions during Friction Stir Welding of polymers: Literature review, experimental results and empirical analysis
F. Simões and D.M. RodriguesMaterials & Design 59 344 (2014)
https://doi.org/10.1016/j.matdes.2013.12.038
Feasibility study of friction stir welding of wood–plastic composites
R. Rahbarpour, T. Azdast, H. Rahbarpour and S. M. ShishavanScience and Technology of Welding and Joining 19 (8) 673 (2014)
https://doi.org/10.1179/1362171814Y.0000000233
Optimization of FS Welding Parameters for Improving Mechanical Behavior of AA2024-T351 Joints Based on Taguchi Method
C. Vidal and V. InfanteJournal of Materials Engineering and Performance 22 (8) 2261 (2013)
https://doi.org/10.1007/s11665-013-0499-x
Friction stir spot welding of dissimilar polymethyl methacrylate and acrylonitrile butadiene styrene sheets
Saeid Hoseinpour Dashatan, Taher Azdast, Samrand Rash Ahmadi and Arvin BagheriMaterials & Design 45 135 (2013)
https://doi.org/10.1016/j.matdes.2012.08.071
Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754-H111
Şefika KasmanThe International Journal of Advanced Manufacturing Technology 68 (1-4) 795 (2013)
https://doi.org/10.1007/s00170-012-4720-0
An experimental study on mechanical properties of friction stir welded ABS sheets
Arvin Bagheri, Taher Azdast and Ali DoniaviMaterials & Design 43 402 (2013)
https://doi.org/10.1016/j.matdes.2012.06.059
Effect of welding parameters on the heat affected zone and the mechanical properties of friction stir welded poly(ethylene‐terephthalate‐glycol)
Z. Kiss and T. CzigányJournal of Applied Polymer Science 125 (3) 2231 (2012)
https://doi.org/10.1002/app.36440
Effect of Process Parameters and Tool Coating on Mechanical Properties and Microstructure of Heat Assisted Friction Stir Welded Polyethylene Sheets
Ehsan Azarsa, Amir Mostafapour Asl and Vahid TavakolkhahAdvanced Materials Research 445 765 (2012)
https://doi.org/10.4028/www.scientific.net/AMR.445.765