EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues EPJ Web of Conferences, 6 (2010) 39002 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Development of a Bench-Top Intermediate-Strain-Rate (ISR) Test Apparatus for Soft Materials

B. Song, T. Martinez, D. Landry, P. Aragon and K. Long
Journal of Dynamic Behavior of Materials 9 (1) 36 (2023)
https://doi.org/10.1007/s40870-022-00357-4

Design and Validation of New Torsion Test Bench for Intermediate Strain Rate Testing

T. Bhujangrao, C. Froustey, P. Darnis, F. Veiga, S. Guérard and F. G. Mata
Experimental Mechanics 63 (1) 3 (2023)
https://doi.org/10.1007/s11340-022-00887-x

Specimen geometry design for plasticity and fracture characterization of sheet metal under high testing speed and various stress states

Chongyang Zeng and Xiangfan Fang
Thin-Walled Structures 186 110688 (2023)
https://doi.org/10.1016/j.tws.2023.110688

Loading measurement for intermediate strain rate material test based on dynamic oscillation

Pengfei Ying, Wentao Chen, Yulong Ge, Qing Zhou and Yong Xia
International Journal of Impact Engineering 173 104436 (2023)
https://doi.org/10.1016/j.ijimpeng.2022.104436

A one-dimensional stress wave model for analytical design and optimization of oscillation-free force measurement in high-speed tensile test specimens

Xiangfan Fang
International Journal of Impact Engineering 149 103770 (2021)
https://doi.org/10.1016/j.ijimpeng.2020.103770

Fundamental Issues and the Applications of Impact Engineering

Takashi YOKOYAMA
Journal of the Society of Materials Science, Japan 70 (6) 486 (2021)
https://doi.org/10.2472/jsms.70.486

A Novel Oscillation-Free Force Measurement for the Determination of Material Properties during High-Speed Tests

X. F. Fang and R. Grams
Journal of Testing and Evaluation 49 (3) 1389 (2021)
https://doi.org/10.1520/JTE20180887

An alternative method for the measurement of mechanical properties at intermediate strain rates: a numerical study

Emanuele Farotti, Edoardo Mancini, Marco Sasso, F. Gálvez Díaz-Rubio and D.A. Cendón Franco
EPJ Web of Conferences 250 02006 (2021)
https://doi.org/10.1051/epjconf/202125002006

Review of Intermediate Strain Rate Testing Devices

Trunal Bhujangrao, Catherine Froustey, Edurne Iriondo, Fernando Veiga, Philippe Darnis and Franck Girot Mata
Metals 10 (7) 894 (2020)
https://doi.org/10.3390/met10070894

Dynamic Behavior of Materials, Volume 1

Bo Song, Brett Sanborn, Jack Heister, et al.
Conference Proceedings of the Society for Experimental Mechanics Series, Dynamic Behavior of Materials, Volume 1 815 81 (2019)
https://doi.org/10.1007/978-3-319-95089-1_12

An Apparatus for Tensile Characterization of Materials within the Upper Intermediate Strain Rate Regime

B. Song, B. Sanborn, J.D. Heister, et al.
Experimental Mechanics 59 (7) 941 (2019)
https://doi.org/10.1007/s11340-019-00494-3

Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates

J.D. Seidt, V-T. Kuokkala, J.L. Smith and A. Gilat
Experimental Mechanics 57 (2) 219 (2017)
https://doi.org/10.1007/s11340-016-0237-z

Identification of strain rate-dependent mechanical behaviour of DP600 under in-plane biaxial loadings

Wei Liu, Dominique Guines, Lionel Leotoing and Eric Ragneau
Materials Science and Engineering: A 676 366 (2016)
https://doi.org/10.1016/j.msea.2016.08.125

A novel intermediate strain rate testing device: The serpentine transmitted bar

W.R. Whittington, A.L. Oppedal, D.K. Francis and M.F. Horstemeyer
International Journal of Impact Engineering 81 1 (2015)
https://doi.org/10.1016/j.ijimpeng.2015.02.009