Evaluation of Residual Stresses using Ring Core Method
EPJ Web of Conferences, 6 (2010) 44004
Published online: 2010-06-10
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Residual Stress in Metallic: Multi-scale Formation Mechanisms, Performance Influences, and Active Control Strategies
Zhiwei Yang, Heng Yang, Xiaokang Yang, Xinfang Bai, Dong Wei, Heng Li, Jingchao Yang, Houlong Liu and Pengfei ZhangInternational Journal of Lightweight Materials and Manufacture (2025)
https://doi.org/10.1016/j.ijlmm.2025.12.007
Effect of clearance on residual stress and quality in rolled tube-tubesheet connections
O.V. Stovpnyk, O.S. Kabat and V.V. Ved’Reporter of the Priazovskyi State Technical University. Section: Technical sciences (50) 61 (2025)
https://doi.org/10.31498/2225-6733.50.2025.336269
Complex Analysis of the Necessary Geometric Parameters of the Tested Component in the Ring-Core Evaluation Process
Patrik Šarga, Alena Galajdová, Marek Vagaš and František MendaMeasurement Science Review 22 (3) 136 (2022)
https://doi.org/10.2478/msr-2022-0017
A Novel Low-Cost DIC-Based Residual Stress Measurement Device
Ege Arabul and Alexander J. G. LuntApplied Sciences 12 (14) 7233 (2022)
https://doi.org/10.3390/app12147233
To study the effect of stress magnitude and tool geometry on the calibration coefficients: Ring core technique
Anoj Giri, Chandan Pandey and Manas M MahapatraProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 232 (6) 674 (2018)
https://doi.org/10.1177/0954408917737585
Ring-core method in determining the amount of non-uniform residual stress in laminated composites: experimental, finite element and theoretical evaluation
Roohollah Ghaedamini, Aazam Ghassemi and Amir AtrianArchive of Applied Mechanics 88 (5) 755 (2018)
https://doi.org/10.1007/s00419-017-1340-z
A comparative experimental study for determination of residual stress in laminated composites using ring core, incremental hole drilling, and slitting methods
Roohollah Ghaedamini, Aazam Ghassemi and Amir AtrianMaterials Research Express 6 (2) 025205 (2018)
https://doi.org/10.1088/2053-1591/aaee46
Error and Uncertainty Analysis of Non-Uniform Residual Stress Evaluation by Using the Ring-Core Method
B. Zuccarello, F. Menda and M. ScafidiExperimental Mechanics 56 (9) 1531 (2016)
https://doi.org/10.1007/s11340-016-0150-5
Integral Method Coefficients and Regularization Procedure for the Ring-Core Residual Stress Measurement Technique
Michele Barsanti, M. Beghini, Ciro Santus, Alessio Benincasa and Lorenzo BertelliAdvanced Materials Research 996 331 (2014)
https://doi.org/10.4028/www.scientific.net/AMR.996.331
Residual Stress Measurement on Large Shafts
Jaroslav Václavík and Otakar WeinbergAdvanced Materials Research 996 295 (2014)
https://doi.org/10.4028/www.scientific.net/AMR.996.295
Residual stresses measurement by using ring-core method and 3D digital image correlation technique
Zhenxing Hu, Huimin Xie, Jian Lu, Jianguo Zhu and Huaixi WangMeasurement Science and Technology 24 (8) 085604 (2013)
https://doi.org/10.1088/0957-0233/24/8/085604