Combined effect of moisture and electrostatic charges on powder flow
EPJ Web Conf., 140 (2017) 13009
Published online: 2017-06-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
New Insight into the Reactivity of Steel Slags: Effect of Post-milling Duration
Milad Eskandarinia, Elijah Adesanya, Brant Walkley and Juho YliniemiJournal of Sustainable Metallurgy (2026)
https://doi.org/10.1007/s40831-026-01421-2
Influence of turbulence on the triboelectric charging of granular materials carried by an airflow
Thomas Gemine, Simon Dehareng, Thomas Andrianne and Geoffroy LumayPhysical Review E 113 (4) (2026)
https://doi.org/10.1103/pyfj-qtgp
Detection of surface oxide transformation during LPBF Re-Use of AlSi10Mg powder via triboelectric charging and its effect on moisture interaction
Ali N. Alagha, Emilio Galindo, José Muñiz, Eileen Ross Espiritu, Martin Conlon, Kamran Azari, Evan Butler-Jones and Mathieu BrochuAdvanced Powder Technology 37 (5) 105254 (2026)
https://doi.org/10.1016/j.apt.2026.105254
Surface chemistry analysis of aluminum powders through triboelectric charging: Effect of composition, particle size distribution and moisture adsorption
Ali N. Alagha, Emilio Galindo, Martin Conlon, José Muñiz, Kamran Azari, Evan Butler-Jones and Mathieu BrochuPowder Technology 468 121636 (2026)
https://doi.org/10.1016/j.powtec.2025.121636
(2025)
https://doi.org/10.2139/ssrn.5895131
Laser additive manufacturing of lunar regolith simulant: New insights from in situ synchrotron X-ray imaging
Caterina Iantaffi, Chu Lun Alex Leung, George Maddison, Eral Bele, Samy Hocine, Rob Snell, Alexander Rack, Martina Meisnar, Thomas Rohr, Iain Todd and Peter D. LeeAdditive Manufacturing 101 104711 (2025)
https://doi.org/10.1016/j.addma.2025.104711
Surface chemistry characterization of AA2014 aluminum alloy powder through triboelectric charging
Ali N. Alagha, Mathilde Rossier, Emilio Galindo, Martin Conlon, José Muñiz, Kamran Azari, Evan Butler-Jones and Mathieu BrochuPowder Technology 449 120411 (2025)
https://doi.org/10.1016/j.powtec.2024.120411
A method to assess the quality of additive manufacturing metal powders using the triboelectric charging concept
E. Galindo, E. R. L. Espiritu, C. Gutierrez, Ali N. Alagha, P. Hudon and M. BrochuScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-67295-0
Role of Powder Properties and Flowability in Polymer Selective Laser Sintering—A Review
Xi Guo and Brij M. MoudgilKONA Powder and Particle Journal 41 26 (2024)
https://doi.org/10.14356/kona.2024012
General aspects of powder rheology applied to pharmaceutical formulations
Marcos MarianoDrug Discovery Today 29 (5) 103976 (2024)
https://doi.org/10.1016/j.drudis.2024.103976
477 (2024)
https://doi.org/10.1016/B978-0-323-99132-2.00016-9
Additive manufacturing of polyamide 12 bulk structures using directed energy deposition with a thulium laser: Effect of process conditions on morphology and mechanical performance
Alexander Wittmann, Claudia Meth, Saeed Alidoust Chamandani, Johannes Vetter, Sebastian-Paul Kopp and Michael SchmidtJournal of Laser Applications 36 (4) (2024)
https://doi.org/10.2351/7.0001586
Tribocharging of granular materials and influence on their flow
Nicolas Preud’homme, Geoffroy Lumay, Nicolas Vandewalle and Eric OpsomerSoft Matter 19 (45) 8911 (2023)
https://doi.org/10.1039/D3SM01322G
Asymmetries in triboelectric charging: Generalizing mosaic models to different-material samples and sliding contacts
Galien Grosjean and Scott WaitukaitisPhysical Review Materials 7 (6) (2023)
https://doi.org/10.1103/PhysRevMaterials.7.065601
Study of the feeding performance of mesoporous silica in a loss-in-weight feeder
Brian M. Kerins, Marcus O'Mahony and Abina M. CreanPowder Technology 424 118529 (2023)
https://doi.org/10.1016/j.powtec.2023.118529
Hydrophobic and raw glass beads flow behavior under different processing conditions
Shirin Enferad, Salvatore Pillitteri, Geoffroy Lumay, et al.EPJ Web of Conferences 249 03008 (2021)
https://doi.org/10.1051/epjconf/202124903008
Numerical measurement of flow fluctuations to quantify cohesion in granular materials
Nicolas Preud'homme, Geoffroy Lumay, Nicolas Vandewalle and Eric OpsomerPhysical Review E 104 (6) (2021)
https://doi.org/10.1103/PhysRevE.104.064901
Effect of colloidal silicon dioxide and moisture on powder flow properties: Predicting in-process performance using image-based analysis
David Blanco, Osmo Antikainen, Heikki Räikkönen, Jouko Yliruusi and Anne Mari JuppoInternational Journal of Pharmaceutics 597 120344 (2021)
https://doi.org/10.1016/j.ijpharm.2021.120344
Literature review: Methods for achieving high powder bed densities in ceramic powder bed based additive manufacturing
Sarah Diener, Andrea Zocca and Jens GünsterOpen Ceramics 8 100191 (2021)
https://doi.org/10.1016/j.oceram.2021.100191
Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7
Pu Deng, Mallikarjun Karadge, Raul B. Rebak, et al.Conference Proceedings of the Society for Experimental Mechanics Series, Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7 75 (2021)
https://doi.org/10.1007/978-3-030-59864-8_12
Densification behaviour and three-dimensional printing of Y2O3 ceramic powder by selective laser sintering
A. Ratsimba, A. Zerrouki, N. Tessier-Doyen, B. Nait-Ali, D. André, P. Duport, A. Neveu, N. Tripathi, F. Francqui and G. DelaizirCeramics International 47 (6) 7465 (2021)
https://doi.org/10.1016/j.ceramint.2020.11.087
Investigation into powder tribo–charging of pharmaceuticals. Part II: Sensitivity to relative humidity
M. Beretta, T.R. Hörmann, P. Hainz, W.K. Hsiao and A. PaudelInternational Journal of Pharmaceutics 591 120015 (2020)
https://doi.org/10.1016/j.ijpharm.2020.120015
Measurement of the deposit formation during pneumatic transport of PMMA powder
Nuki Susanti and Holger GrosshansAdvanced Powder Technology 31 (8) 3597 (2020)
https://doi.org/10.1016/j.apt.2020.07.005
Effects of Water on Powder Flowability of Diverse Powders Assessed by Complimentary Techniques
Cosima Hirschberg, Changquan Calvin Sun, Jens Risbo and Jukka RantanenJournal of Pharmaceutical Sciences 108 (8) 2613 (2019)
https://doi.org/10.1016/j.xphs.2019.03.012
Fundamental theories and basic principles of triboelectric effect: A review
Shuaihang Pan and Zhinan ZhangFriction 7 (1) 2 (2019)
https://doi.org/10.1007/s40544-018-0217-7
Influence of mesoporous silica on powder flow and electrostatic properties on short and long term
G. Lumay, S. Pillitteri, M. Marck, F. Monsuur, T. Pauly, Q. Ribeyre, F. Francqui and N. VandewalleJournal of Drug Delivery Science and Technology 53 101192 (2019)
https://doi.org/10.1016/j.jddst.2019.101192