Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Study on the dynamic properties of AM-SLM AlSi10Mg alloy using the Split Hopkinson Pressure Bar (SHPB) technique

Bar Nurel, Moshe Nahmany, Adin Stern, Nahum Frage, Oren Sadot

EPJ Web Conf., 183 (2018) 04005

Published online: 2018-09-07

DOI: https://doi.org/10.1051/epjconf/201818304005

This article has been cited by the following article(s):

High-strain-rate response of alloys fabricated by conventional and additive manufacturing techniques

Rocel Gualberto, M Manjaiah, Harveen Bongao, Persia de Yro, Eduardo Magdaluyo and Clodualdo Aranas
Progress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-024-00944-y

Quasi-isentropic compression of an additively manufactured aluminum alloy to 14.8 GPa

Nathan P. Brown, Paul E. Specht and Justin L. Brown
Journal of Applied Physics 132 (22) (2022)
https://doi.org/10.1063/5.0127989

Improvement and application of miniature Hopkinson bar device based on series-parallel coil array electromagnetic launch

Su Cai, Dongliang Wu, Jiangfan Zhou, et al.
Measurement 186 110203 (2021)
https://doi.org/10.1016/j.measurement.2021.110203

Effect of build orientation and elevated temperature on microhardness and deformation of dynamically tested SLM processed AlSi12 alloy

P. Ponnusamy, S.H. Masood, D. Ruan and S. Palanisamy
Materials Today: Proceedings 38 2488 (2021)
https://doi.org/10.1016/j.matpr.2020.07.514

Shock compression response of additively manufactured AlSi10Mg

Paul E. Specht and Nathan P. Brown
Journal of Applied Physics 130 (24) (2021)
https://doi.org/10.1063/5.0076604

The mechanical behavior and microstructure of additively manufactured AlSi10Mg for different material states and loading conditions

Michael Schuch, Tom Hahn and Matthias Bleckmann
Materials Science and Engineering: A 813 141134 (2021)
https://doi.org/10.1016/j.msea.2021.141134

M. Laurençon, T. de Rességuier, D. Loison and J. Baillargeat
2272 100018 (2020)
https://doi.org/10.1063/12.0001090

Dynamic compressive behaviour of selective laser melted AlSi12 alloy: Effect of elevated temperature and heat treatment

P. Ponnusamy, S.H. Masood, D. Ruan, S. Palanisamy, R.A. Rahman Rashid, Reiza Mukhlis and Nathan J. Edwards
Additive Manufacturing 36 101614 (2020)
https://doi.org/10.1016/j.addma.2020.101614

Mechanical Properties of SLM-Printed Aluminium Alloys: A Review

Panneer Ponnusamy, Rizwan Abdul Rahman Rashid, Syed Hasan Masood, Dong Ruan and Suresh Palanisamy
Materials 13 (19) 4301 (2020)
https://doi.org/10.3390/ma13194301