Validation of a CFD model of a single stage centrifugal compressor by mass-averaged parameters
EPJ Web Conf., 196 (2019) 00026
Published online: 2019-01-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Challenges in CFD Model Validation: A Case Study Approach Using ANSYS CFX and TurboGrid
Jordan Dickenson, James M. Buick, Jovana Radulovic and James BullMachines 13 (7) 593 (2025)
https://doi.org/10.3390/machines13070593
Numerical Study of the Flow in the Flow Path of a Centrifugal Natural Gas Compressor at Different Positions of the Inlet Guide Vane
M.V. Krutikov and V.L. BlinovHerald of the Bauman Moscow State Technical University. Series Mechanical Engineering (2 (137)) 94 (2021)
https://doi.org/10.18698/0236-3941-2021-2-94-108
Searching for the Most Suitable Loss Model Set for Subsonic Centrifugal Compressors Using an Improved Method for Off-Design Performance Prediction
Patrik Kovář, Adam Tater, Pavel Mačák and Tomáš VampolaEnergies 14 (24) 8545 (2021)
https://doi.org/10.3390/en14248545
Development of a Design Methodology for a Centrifugal Compressor with the Utilization of CFD
Zeynep AYTAÇ and Nuri YÜCELPoliteknik Dergisi 23 (1) 231 (2020)
https://doi.org/10.2339/politeknik.658358