Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

3D printed magnets for neutron spin manipulation

Richard Wagner, Laurids Brandl, Wenzel Kersten, Stephan Sponar, Yuji Hasegawa, Christian Huber, Florian Bruckner, Dieter Suess

EPJ Web Conf., 219 (2019) 10008

Published online: 2019-12-12

DOI: https://doi.org/10.1051/epjconf/201921910008

This article has been cited by the following article(s):

Additive-manufactured anisotropic magnets for harsh environments

Benjamin Podmiljšak, Spomenka Kobe, Tomaž Tomše, Marko Bek, Tomaž Kotnik, Lidija Slemenik Perše, Ema Žagar, Boris Saje, Kristina Žužek and Sašo Šturm
Journal of Magnetism and Magnetic Materials 586 171165 (2023)
https://doi.org/10.1016/j.jmmm.2023.171165

Advances in Metal Additive Manufacturing

Rafael Paiotti M. Guimarães, Lisa Minkowitz, Siegfried Arneitz, et al.
Advances in Metal Additive Manufacturing 1 (2023)
https://doi.org/10.1016/B978-0-323-91230-3.00003-2

Additive Manufacturing of Magnets for Use in Harsh Environments

Benjamin Podmiljsak, Spomenka Kobe, Tomaž Tomše, et al.
SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4200999

A Review of Extrusion-Based 3D Printing for the Fabrication of Electro- and Biomechanical Sensors

Martijn Schouten, Gerjan Wolterink, Alexander Dijkshoorn, et al.
IEEE Sensors Journal 21 (11) 12900 (2021)
https://doi.org/10.1109/JSEN.2020.3042436

Fused filament fabrication of Nd-Fe-B bonded magnets: Comparison of PA12 and TPU matrices

Janez Slapnik, Irena Pulko, Rebeka Rudolf, Ivan Anžel and Mihael Brunčko
Additive Manufacturing 38 101745 (2021)
https://doi.org/10.1016/j.addma.2020.101745