Microstructure and mechanical behaviour of additive manufactured Ti–6Al–4V parts under tension
EPJ Web Conf., 221 (2019) 01037
Published online: 2019-10-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Comparison of direct energy deposition and powder bed fusion technology in the preparation of Ti–6Al–4V alloy
Daniela Medová, Anna Knaislová, Angelina Strakosova, Orsolya Molnárová, Jaroslav Čapek, Ilona Voňavková and Dalibor VojtěchJournal of Materials Research and Technology 35 3825 (2025)
https://doi.org/10.1016/j.jmrt.2025.01.231
Analysis and Comparison of the Projectile Impact Response of an Electron Beam Melt-Ti64 Body Centered Cubic Lattice-Cored Sandwich Plate
H. İ. Erten, G. Çimen, F. M. Yıldıztekin and M. GüdenExperimental Mechanics 65 (4) 495 (2025)
https://doi.org/10.1007/s11340-025-01150-9
On the impact of pure PVC and (PVC: Ti) interlayer on the conduction mechanisms and physical parameters of classic metal-semiconductor (MS) Schottky diodes (SDs)
Çiğdem Şükriye GüçlüPhysica B: Condensed Matter 689 416173 (2024)
https://doi.org/10.1016/j.physb.2024.416173
Experimental and Computational Study of Optimized Gas Diffusion Layer for Polymer Electrolyte Membrane Electrolyzer
Javid Hussain, Dae-Kyeom Kim, Sangmin Park, et al.Materials 16 (13) 4554 (2023)
https://doi.org/10.3390/ma16134554
Influence of heat accumulation on the distribution uniformity of microstructure and mechanical properties of laser additive manufacturing joint of 80 mm thick Ti6Al4V titanium alloy plates
Zhuanni Gao, Huizi Shi, Xingyun Yang, et al.Journal of Materials Processing Technology 310 117774 (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117774
Scale levels of quasi-static and dynamic fracture behavior of Ti-6Al-4V parts built by various additive manufacturing methods
Alexey V. Panin, Marina S. Kazachenok, Sergey V. Panin and Filippo BertoTheoretical and Applied Fracture Mechanics 110 102781 (2020)
https://doi.org/10.1016/j.tafmec.2020.102781