Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Effects of Milling Parameters on Distribution of Residual Stress During the Milling of Curved Thin-Walled Parts

Xiangjing Kong, Zishan Ding, Lijun Xu, Lijian Zhu, Jian Zhang, Chongjun Wu, Alexander Isaev

EPJ Web Conf., 224 (2019) 05009

Published online: 2019-12-09

DOI: https://doi.org/10.1051/epjconf/201922405009

This article has been cited by the following article(s):

Analysis of machining strategies in terms of residual stress and post-machining deformation of thin-walled element

Magdalena Zawada-Michałowska and Paweł Pieśko
The International Journal of Advanced Manufacturing Technology 142 (5-6) 2335 (2026)
https://doi.org/10.1007/s00170-025-17176-1

Milling characteristics of SiCp/2024Al composites thin-walled part based on movable auxiliary support

Zhijie Gao, Peng Zhu, Shu Yang, Zuoshan Wei, Qitong Wang and Li Zhou
Transactions of the Canadian Society for Mechanical Engineering 48 (2) 280 (2024)
https://doi.org/10.1139/tcsme-2023-0148

Gao Zhijie, Zhu Peng, Yang Shu, Wei Zuoshan, Wang Qitong and zhou li
(2023)
https://doi.org/10.21203/rs.3.rs-3013727/v1

Mathematical Models of the Geometry of Micro Milling Cutters

Alexander Isaev, Ramil Khamzin, Artem Ershov, et al.
EPJ Web of Conferences 248 04003 (2021)
https://doi.org/10.1051/epjconf/202124804003

Three-dimensional modeling and reconstructive change of residual stress during machining process of milling, polishing, heat treatment, vibratory finishing, and shot peening of fan blade

Ji-Yin Zhang, Chang-Feng Yao, Min-Chao Cui, Liang Tan and Yun-Qi Sun
Advances in Manufacturing 9 (3) 430 (2021)
https://doi.org/10.1007/s40436-021-00351-4

Analysis of Positioning Adjustment Approaches for Cutting Inserts of Thread Cutters

Vladimir Grechishnikov, Alexander Isaev, Mikhail Kozochkin, et al.
EPJ Web of Conferences 248 04013 (2021)
https://doi.org/10.1051/epjconf/202124804013