Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

Effect of Friction Stir Welding Techniques and Parameters on Polymers Joint Efficiency—A Critical Review

Miguel A. R. Pereira, Ana M. Amaro, Paulo N. B. Reis and Altino Loureiro
Polymers 13 (13) 2056 (2021)
DOI: 10.3390/polym13132056
See this article

Welding parameters and joint strength optimization during friction stir welding of high density polyethylene (HDPE) using the Taguchi method

Aydın Ülker, Sami Sayer and Vural Ceyhun
Materials Testing 58 (5) 423 (2016)
DOI: 10.3139/120.110874
See this article

Effect of Friction Stir Welding Parameters with Newly Developed Tool for Lap Joint of Dissimilar Polymers

Shayan Eslami, Tiago Ramos, Paulo J. Tavares and P.M.G.P. Moreira
Procedia Engineering 114 199 (2015)
DOI: 10.1016/j.proeng.2015.08.059
See this article

Optimization of transversal flow stress and strain and weld seam microstructure analysis in butt-HDPE friction stir welded plates

Khaled Hamrouni, Mohamed-Ali Rezgui, Ali Trabelsi, Zoltan Kiss and Rachid Nasri
Mechanics & Industry 21 (5) 501 (2020)
DOI: 10.1051/meca/2020047
See this article

Shoulder design developments for FSW lap joints of dissimilar polymers

Shayan Eslami, Tiago Ramos, Paulo J. Tavares and P.M.G.P. Moreira
Journal of Manufacturing Processes 20 15 (2015)
DOI: 10.1016/j.jmapro.2015.09.013
See this article

Parameter optimisation of friction stir welded dissimilar polymers joints

Shayan Eslami, M. A. V. de Figueiredo, Paulo J. Tavares and P. M. G. P. Moreira
The International Journal of Advanced Manufacturing Technology 94 (5-8) 1759 (2018)
DOI: 10.1007/s00170-017-0043-5
See this article

Feasibility study of friction stir welding of wood–plastic composites

R. Rahbarpour, T. Azdast, H. Rahbarpour and S. M. Shishavan
Science and Technology of Welding and Joining 19 (8) 673 (2014)
DOI: 10.1179/1362171814Y.0000000233
See this article

Effect of welding parameters on the heat affected zone and the mechanical properties of friction stir welded poly(ethylene-terephthalate-glycol)

Z. Kiss and T. Czigány
Journal of Applied Polymer Science 125 (3) 2231 (2012)
DOI: 10.1002/app.36440
See this article

Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754-H111

Şefika Kasman
The International Journal of Advanced Manufacturing Technology 68 (1-4) 795 (2013)
DOI: 10.1007/s00170-012-4720-0
See this article

Optimization of FS Welding Parameters for Improving Mechanical Behavior of AA2024-T351 Joints Based on Taguchi Method

C. Vidal and V. Infante
Journal of Materials Engineering and Performance 22 (8) 2261 (2013)
DOI: 10.1007/s11665-013-0499-x
See this article

An experimental study on mechanical properties of friction stir welded ABS sheets

Arvin Bagheri, Taher Azdast and Ali Doniavi
Materials & Design 43 402 (2013)
DOI: 10.1016/j.matdes.2012.06.059
See this article

Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets

H. Aghajani Derazkola and Abdolreza Simchi
Science and Technology of Welding and Joining 23 (3) 209 (2018)
DOI: 10.1080/13621718.2017.1364896
See this article

Material flow and thermo-mechanical conditions during Friction Stir Welding of polymers: Literature review, experimental results and empirical analysis

F. Simões and D.M. Rodrigues
Materials & Design 59 344 (2014)
DOI: 10.1016/j.matdes.2013.12.038
See this article

Friction stir spot welding of dissimilar polymethyl methacrylate and acrylonitrile butadiene styrene sheets

Saeid Hoseinpour Dashatan, Taher Azdast, Samrand Rash Ahmadi and Arvin Bagheri
Materials & Design 45 135 (2013)
DOI: 10.1016/j.matdes.2012.08.071
See this article

Optimizing process parameters for joint strength efficiency improvement in friction stir welding of polycarbonate sheets

S.K. Sahu, D. Mishra and K. Pal
Materialwissenschaft und Werkstofftechnik 52 (7) 739 (2021)
DOI: 10.1002/mawe.202000205
See this article

Application and exploration of friction stir welding/processing in plastics industry

Jicheng Gao, Xixi Cui, Cheng Liu and Yifu Shen
Materials Science and Technology 33 (10) 1145 (2017)
DOI: 10.1080/02670836.2016.1276251
See this article

Friction stir welding of thermoplastics using a newly designed tool

Mehdi Pirizadeh, Taher Azdast, Samrand Rash Ahmadi, Sajjad Mamaghani Shishavan and Arvin Bagheri
Materials & Design (1980-2015) 54 342 (2014)
DOI: 10.1016/j.matdes.2013.08.053
See this article

Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene

Razi Ur Rehman, Jamal Sheikh-Ahmad and Suleyman Deveci
The International Journal of Advanced Manufacturing Technology (2021)
DOI: 10.1007/s00170-021-07740-w
See this article

Mechanical and thermal properties of friction-stir welded joints of high density polyethylene using a non-rotational shoulder tool

Mirley Moreno-Moreno, Yorledis Macea Romero, Habib Rodríguez Zambrano, et al.
The International Journal of Advanced Manufacturing Technology 97 (5-8) 2489 (2018)
DOI: 10.1007/s00170-018-2102-y
See this article

Solid State Joining of Thin Hybrid Sandwiches Made of Steel and Polymer: a Feasibility Study

Gianluca Buffa, Davide Campanella, Archimede Forcellese, Livan Fratini and Michela Simoncini
Procedia Manufacturing 47 400 (2020)
DOI: 10.1016/j.promfg.2020.04.315
See this article

Multi sensor based strategies for accurate prediction of friction stir welding of polycarbonate sheets

Santosh K Sahu, Debasish Mishra, Kamal Pal and Surjya K Pal
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 095440622096077 (2020)
DOI: 10.1177/0954406220960772
See this article

Friction stir welding tooling for polymers: review and prospects

Shayan Eslami, Paulo J. Tavares and P. M. G. P. Moreira
The International Journal of Advanced Manufacturing Technology 89 (5-8) 1677 (2017)
DOI: 10.1007/s00170-016-9205-0
See this article

Friction stir welding/processing of polymers and polymer matrix composites

Yongxian Huang, Xiangchen Meng, Yuming Xie, et al.
Composites Part A: Applied Science and Manufacturing 105 235 (2018)
DOI: 10.1016/j.compositesa.2017.12.005
See this article

Effect of Process Parameters and Tool Coating on Mechanical Properties and Microstructure of Heat Assisted Friction Stir Welded Polyethylene Sheets

Ehsan Azarsa, Amir Mostafapour Asl and Vahid Tavakolkhah
Advanced Materials Research 445 765 (2012)
DOI: 10.4028/www.scientific.net/AMR.445.765
See this article

Investigation on Mechanical Behavior of Friction Stir Welded Nylon-6 Using Temperature Signatures

Santosh K. Sahu, Raju P. Mahto and Kamal Pal
Journal of Materials Engineering and Performance 29 (8) 5238 (2020)
DOI: 10.1007/s11665-020-05030-2
See this article

Manufacturing Parameters, Materials, and Welds Properties of Butt Friction Stir Welded Joints–Overview

Aleksandra Laska and Marek Szkodo
Materials 13 (21) 4940 (2020)
DOI: 10.3390/ma13214940
See this article

Termoplastiklerin Sürtünme Karıştırma Kaynağı ile Birleştirilmesinde Kullanılan Yöntemler

İdris KARAGÖZ and Mustafa ÖKSÜZ
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 31 (ÖS1) 19 (2016)
DOI: 10.21605/cukurovaummfd.311197
See this article

RETRACTED ARTICLE: Finite element simulation of material flow in friction stir process of nylon 6 and nylon 6/MWCNTs composite

Reza Farshbaf Zinati and Zude Zhou
Cogent Engineering 2 (1) 1 (2015)
DOI: 10.1080/23311916.2015.1048098
See this article

Mechanical properties of friction-stir-welded polyamide sheets

Imad M. Husain, Raed K. Salim, Taher Azdast, Soran Hasanifard, Sajjad M. Shishavan and Richard Eungkee Lee
International Journal of Mechanical and Materials Engineering 10 (1) (2015)
DOI: 10.1186/s40712-015-0047-6
See this article

On the mechanical characteristics of friction stir welded dissimilar polymers: statistical analysis of the processing parameters and morphological investigations of the weld joint

Sunpreet Singh, Gurminder Singh, Chander Prakash and Ranvijay Kumar
Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 (4) (2020)
DOI: 10.1007/s40430-020-2227-4
See this article

A Review on Advancement in Friction Stir Welding Considering the Tool and Material Parameters

Vijay Kumar Mahakur, Krushna Gouda, Promod Kumar Patowari and Sumit Bhowmik
Arabian Journal for Science and Engineering 46 (8) 7681 (2021)
DOI: 10.1007/s13369-021-05524-8
See this article

Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets

Hamed Aghajani Derazkola and Abdolreza Simchi
Journal of Manufacturing Processes 34 412 (2018)
DOI: 10.1016/j.jmapro.2018.06.015
See this article

Syed Haris Iftikhar, Abdel-Hamid Ismail Mourad and Jamal Sheikh-Ahmad
1 (2020)
DOI: 10.1109/ASET48392.2020.9118183
See this article