Open Access
EPJ Web of Conferences
Volume 26, 2012
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 04035
Number of page(s) 6
Section Modeling and Numerical Simulation
Published online 31 August 2012
  1. E.D.H. Davies, S.C. Hunter, The dynamic compression testing of solids by the method of the split Hopkinson pressure bar, J. Mech. Phys. Solids. 11: 155-179 (1963). [CrossRef]
  2. P.H. Bischoff, S.H. Perry, Compression behaviour of concrete at high strain-rates, Mater Struct. 24: 425-450 (1991). [CrossRef]
  3. C.A. Ross, J.W. Tedesco, S.T. Kuennen, Effects of strain rate on concrete strength, ACI Mate J. 92: 75-81 (1990).
  4. D.L. Grote, S.W. Park, M. Zhou, Dynamic behavior of concrete at high strain rates and pressures: I. Experimental characterization, Int J Impact Eng. 25: 869-86 (2001). [CrossRef]
  5. Q.M. Li, H. Meng, About the Dynamic strength enhancement of concrete like materials in a split Hopkinson pressure bar test, Int J Solids Struct., 40: 343-360 (2003). [CrossRef]
  6. X.Q. Zhou, H. Hao, Modelling of compressive behaviour of concrete-like materials at high strain rate, Int. J Solids Struct. 45: 4648-61 (2008). [CrossRef]
  7. P.S. Follansbee, The Hopkinson pressure bar, in: Kuhn, H, Medlin, D. (Eds), ASM Handbook-Vol. 8 Mechanical Testing and Evaluation. ASM International; 198-203 (1985).
  8. Y. Lu, Z.H. Song, Z.G. Tu, Analysis of dynamic response of concrete using a mesoscale model incorporating 3D effects, Int J Prot Struct., 1(2): 197-217 (2010). [CrossRef]
  9. F.V. Donze, S.-A. Magnier, L. Daudeville, C. Mariotti, C. Davenne, Numerical study of compressive behavior of concrete at high strain rates, J Eng Mech-ASCE. 125: 1154-63 (1999). [CrossRef]
  10. J. Rodriguez, C. Navarro, V. Sanchez-Galvez, Splitting tests: an alternative to determine the dynamic tensile strength of ceramic materials. Journal de Physique IV, 4(C8): 101-106 (1994).
  11. G. Ruiz, M. Ortiz, A. Pandol, Three-dimensional finite-element simulation of the dynamic Brazilian tests on concrete cylinders. Int. J. Numer. Meth. Engng, 48, 963-994 (2000). [CrossRef]
  12. M.L. Hughes, J.W. Tedesco, C.A. Ross, Numerical analysis of high strain rate slitting-tensile tests. Computers & Structures, 47(4/5): 653-671 (1993). [CrossRef]
  13. J.W. Tedesco, C.A. Ross, S.T. Kuennen, Experimental and numerical-analysis of high-strain rate splitting tensile tests. ACI Materials Journal, 90(2), 162-169 (1993).