Open Access
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 02006
Number of page(s) 6
Section Microstructural Effects
Published online 07 September 2015
  1. Y. Zhai, D.A. Lados, J.L. Lagoy, Journal of Metals, 66, 808 (2014)
  2. A.N. Hopkinson, P. Dickens, J. Mechanical Engineering Science, 217, 31 (2003) [CrossRef]
  3. B.R. Berger, Additive Manufacturing: A Game Changer for the Manufacturing Industry? (Berger STrategy Consultants, Munich, Germany, 2013)
  4. T.J. Horn, O.A. Harrysson, Science Progress, 95, 255 (2012) [CrossRef]
  5. I. Gibson, D.W. Rosen, B. Stucker, Additive Manufacturing Technologies: Rapid Prototyping to Direct Manufacturing (Springer, New York, 2010)
  6. D.L. Bourell, M.C. Leu, D.W. Rosen, Roadmap for Additive Manufacturing: Identifying the Future of Freeform Processing (University of Texas at Austin, Austin, TX, 2009)
  7. T. Foresight Project, The Future of Manufacturing: A New Era of Opportunity and Challenges for the UK (Science TGOf, London, England, 2013)
  8. T. Energetics Incorporated, Measurement Science Roadmap for Metal-Based Additive Manufacturing (Technology NIoS, Washington, DC, 2013)
  9. N.R. Council, 3D Printing in Space (The National Academy Press, Washington, DC 20001, 2014)
  10. E. Yasa, J. Deckers, J.-P. Kruth, M. Rombouts, J. Luyten, VIrtual and Physical Prototyping, 5, 89 (2010) [CrossRef]
  11. B. Verlee, T. Dormal, J. Lecomte-BEckers, Powder Metallurgy, 55, 260 (2012) [CrossRef]
  12. J.A. Cherry, H.M. Davies, S. Mehmood, N.P. Lavery, S.G.R. Brown, J. Sienz, International journal of Advanced Manufacturing Technology, 76, 869 (2015) [CrossRef]
  13. A.S. Wu, D.W. Brown, M. Kumar, G.F. Gallegos, W.E. King, Metallurgical and Materials Transactions A, 45A, 6260 (2014)
  14. E. Brandl, U. Heckenberger, V. Holzinger, D. Buchbinder, Materials and Design, 34, 159 (2012) [CrossRef]
  15. B. Baufeld, E. Brandl, O. van der Biest, Journal of Materials Process Technology, 211, 1146 (2011) [CrossRef]
  16. J.A. Brooks, J.C. Williams, A.W. Thompson, Trends in Welding Research (ASM, 1982)
  17. G.T. Gray III, In: ASM Handbook. Vol. 8: Mechanical Testing and Evaluation, edited by Kuhn H, Medlin D, ASM International, Materials Park, Ohio(2000), p. 530
  18. O.T. Strand, D.R. Goosman, C. Martinez, T.L. Whitworth, W. W. Kuhlow, Rev. Sci. Instrum., 77, 083108 (2006) [CrossRef]
  19. B.J. Jensen, D.B. Holtkamp, P.A. Rigg, D.H. Dolan, J. Appl. Phys., 101, 013523 (2007) [CrossRef]
  20. P.S. Follansbee, Fundamentals of Strength (John Wiley & Sons, Inc., Hoboken, N.J., 2104)
  21. S.A. Novikov, I.I. Divnov, A.G. Ivanov, Phys. Metals Metallog., 21(4), 122 (1966)
  22. G.T. Gray III, N.K. Bourne, B.L. Henrie, J.C.F. Millett, J. Phys. IV France, 110, 773 (2003) [CrossRef] [EDP Sciences]
  23. G.T. Gray III, N.K. Bourne, B.L. Henrie, J. Appl. Phys., 101, 093507 (2007) [CrossRef]
  24. J.P. Escobedo, D. Dennis-Koller, E.K. Cerreta, B.M. Patterson, C.A. Bronkhorst, B.L. Hansen, D. Tonks, R.A. Lebensohn, J. Appl. Phys., 110, 033513 (2011) [CrossRef]