Issue |
EPJ Web of Conferences
Volume 6, 2010
ICEM 14 – 14th International Conference on Experimental Mechanics
|
|
---|---|---|
Article Number | 38002 | |
Number of page(s) | 8 | |
Section | Thermomechanics | |
DOI | https://doi.org/10.1051/epjconf/20100638002 | |
Published online | 10 June 2010 |
https://doi.org/10.1051/epjconf/20100638002
Experimental analysis of the Portevin Le Chatelier effect by means of full field non contact techniques
1
Politecnico di Torino, Dip. di Meccanica1, C.so Duca degli
Abruzzi 24, 10129
Torino,
Italy
2
Politecnico di Torino, Dip. di Scienza dei Materiali e
Ingegneria Chimica2, C.so Duca degli Abruzzi 24,
10129
Torino,
Italy
Strain related phenomena in materials showing the Portevin Le Chatelier (PLC) effect are investigated when subjected to loading conditions both in elastic and in plastic field. Two experimental techniques for strain measurements are compared, thermography and optical strain measurement, both non contact, non destructive and full field. Two materials have been tensile tested with several test speeds. Each specimen has been observed and test evolution has contemporaneously been acquired with both video and thermotracer. Each test has been repeated several times. Aim of this research is to investigate how these experimental techniques may quantitatively describe the above described phenomena. Experimental data are useful to calibrate models describing the mechanical behaviour of materials (i.e. constitutive laws, damage models, etc.) and to focus phenomena which take place during load and corresponding strain phases.
© Owned by the authors, published by EDP Sciences, 2010
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.