| Issue |
EPJ Web Conf.
Volume 146, 2017
ND 2016: International Conference on Nuclear Data for Science and Technology
|
|
|---|---|---|
| Article Number | 11023 | |
| Number of page(s) | 4 | |
| Section | Nuclear Reaction Measurements | |
| DOI | https://doi.org/10.1051/epjconf/201714611023 | |
| Published online | 13 September 2017 | |
https://doi.org/10.1051/epjconf/201714611023
Fast-neutron-induced fission of 242Pu at nELBE
1 Helmholtz-Zentrum Dresden - Rossendorf, Postfach 510 119, 01314 Dresden, Germany
2 Technische Universität Dresden, Postfach 100 920, 01076 Dresden, Germany
a e-mail: t.koegler@hzdr.de
b e-mail: a.junghans@hzdr.de
c Present address: Lund University, PO Box 117, 221 00 Lund, Sweden
d Present address: National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, Michigan 48824, USA
Published online: 13 September 2017
The fast neutron-induced fission cross section of 242Pu was determined in the range of 0.5 MeV to 10 MeV relative to 235U(n,f) at the neutron time-of-flight facility nELBE. The number of target nuclei was calculated by means of measuring the spontaneous fission rate of 242Pu. Neutron transport simulations with Geant4 and MCNP6 are used to correct the relative cross section for neutron scattering. The determined results are in good agreement with current experimental and evaluated data sets.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.