Issue |
EPJ Web Conf.
Volume 287, 2023
EOS Annual Meeting (EOSAM 2023)
|
|
---|---|---|
Article Number | 09039 | |
Number of page(s) | 2 | |
Section | Topical Meeting (TOM) 9- Applications in Optics and Photonics | |
DOI | https://doi.org/10.1051/epjconf/202328709039 | |
Published online | 18 October 2023 |
https://doi.org/10.1051/epjconf/202328709039
White Light Interferometry: Absolute and High Precision Measurement for Long-Cavity Fibre Fabry-Perot Sensors
1 INESC TEC – Institute for Systems and Computer Engineering, Technology and Science, Porto, Portugal
2 Department of Engineering Physics, Faculty of Engineering of University of Porto, Portugal
3 Faculty of Health Sciences, University Fernando Pessoa, R. Carlos da Maia 296, 4200-150 Porto, Portugal
* Corresponding author: paulo.robalinho@inesctec.pt
Published online: 18 October 2023
White Light Interferometry, known for its absolute measurement capability and high precision, had its greatest scientific impact towards the end of the 20th century. In this work, it was assembled and characterized a fibre Mach-Zehnder interferometer (MZI) as an interrogator and a fibre Fabry-Perot interferometer (FPI) as a displacement sensor. A measurement bandwidth between 65 μm and 95 μm was obtained for FPI cavities close to 2.35 mm, at sampling frequencies between 600 Hz and 1500 Hz. Additionally, a resonant frequency at 550 Hz was achieved, allowing for an interrogation band higher than 135 μm. It was also determined a minimum absolute resolution of ± 66 nm, corresponding to a relative resolution of ± 9.4×10-4 in relation to the total band.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.