EPJ Web of Conferences
Volume 45, 2013EFM12 – Experimental Fluid Mechanics 2012
|Number of page(s)||4|
|Published online||09 April 2013|
Capture efficiency measurement of pollutants over a workbench with the reinforced slot exhaust system
Brno University of Technology, Brno, Czech Republic
a e-mail: firstname.lastname@example.org
The paper deals with the measurement of the capture efficiency of pollutants by the slot reinforced exhaust system situated in two positions over the workbench. The slot reinforced exhaust system, which is known as REEXS, is the traditional slot exhaust hood equipped with an air supply inlet that intensifies exhausting along the axis of the exhaust hood. It can operate in traditional or reinforced exhaust modes. Measurements were made for the same air velocity in the suction slot and with the different momentum flux ratio of supplied and exhausted air flow. The tracer gas method was used for the capture efficiency measurement of the system. As the tracer gas the carbon dioxide was chosen. The knowledge of the shape and range of the effective exhaust area for various configurations in front of the exhaust hood is important for the exhaust hood setting according to a source of pollutants.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.