EPJ Web of Conferences
Volume 45, 2013EFM12 – Experimental Fluid Mechanics 2012
|Number of page(s)||4|
|Published online||09 April 2013|
Stereoscopic reconstruction of 3D PIV data in T-junction with circular profile
1 Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, 46117 Liberec, Czech Republic email@example.com
2 Faculty of Mechatronics, Informatics and Interdisciplinary Studies, Technical University of Liberec, 46117 Liberec, Czech
In this paper experimental study of flow in T-junction using 3D PIV method is presented. Motion of seeding particles was recorded by a pair of suitably located cameras in precisely defined cross sections of the junction. Based on this information, three-dimensional model of flow in different sections of junction was reconstructed. The reconstruction results from the projection matrixes of each camera, which are obtained from positions of objects in the scene and their projection positions in the image plane. Standard 3D PIV reconstruction was rejected, because of optical distortion in T-Junction.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.