| Issue |
EPJ Web of Conferences
Volume 45, 2013
EFM12 – Experimental Fluid Mechanics 2012
|
|
|---|---|---|
| Article Number | 01125 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/epjconf/20134501125 | |
| Published online | 09 April 2013 | |
https://doi.org/10.1051/epjconf/20134501125
The structural design of the experimental equipment for unconventional heating water using heat transfer surfaces located in the heat source
University of Žilina, Faculty of Mechanical Engineering,Department of Power Engineering, Univerzitna 1, 010 26 Žilina, Slovakia
a e-mail: katarina.kaduchova@fstroj.uniza.sk
Flue gas temperature at throat of most industrially produced fireplaces is around 250 to 350 °C. It's quite interesting thermal potential, which can be even before sucking up the chimney back utilize. One of the potential uses of this device to heat the hot water. Article refers to the structural design of such a device, which works with the transfer of heat through a substance changes phase from liquid to steam in a sealed tube (heat pipe). Benefits of heat pipes is their light weight, the thermal effect of a rapid and low maintenance costs.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.