EPJ Web of Conferences
Volume 53, 2013UHECR 2012 - International Symposium on Future Directions in UHECR Physics
|Number of page(s)||7|
|Section||Calibrations and Atmosphere|
|Published online||25 June 2013|
Absolute energy calibration of the Telescope Array fluorescence detector with an electron linear accelerator
1 ICRR, University of Tokyo, 5-1-5 Kashiwanoha , Kashiwa, Chiba (277-8582), Japan
2 University of Utah, 115S, 1400E, Salt Lake City, UT(4112-0830), USA
3 Department of Physics, Hanyang University, 222 Wangsimni-ro Seongdung-gu Seoul, 133-791, Korea
a e-mail: firstname.lastname@example.org
The Electron Light Source(ELS) is a new light source for the absolute energy calibration of cosmic ray Fluorescence Detector(FD) telescopes. The ELS is a compact electron linear accelerator with a typical output of 109 electrons per pulse at 40 MeV. We fire the electron beam vertically into the air 100 m in front of the telescope. The electron beam excites the gases of the atmosphere in the same way as the charged particles of the cosmic ray induced extensive air shower. The gases give off the same light with the same wavelength dependence. The light passes through a small amount of atmosphere and is collected by the same mirror and camera with their wavelength dependence. In this way we can use the electron beam from ELS to make an end-to-end calibration of the telescope. In September 2010, we began operation of the ELS and the FD telescopes observed the fluorescence photons from the air shower which was generated by the electron beam. In this article, we will reort the status of analysis of the absolute energy calibration with data which was taken in September 2010, and beam monitor study in November 2011.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.