| Issue |
EPJ Web of Conferences
Volume 59, 2013
IFSA 2011 – Seventh International Conference on Inertial Fusion Sciences and Applications
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 5 | |
| Section | IV. Implosion Hydrodynamics and Hydro-Instabilities | |
| DOI | https://doi.org/10.1051/epjconf/20135904005 | |
| Published online | 15 November 2013 | |
https://doi.org/10.1051/epjconf/20135904005
Defect-induced mix experiment for NIF
1 Los Alamos National Laboratory, MS F699, Los Alamos, NM 87544, USA
2 Office of Fusion Energy Sciences, SC-24, 19901 Germantown Rd, Germantown, MD 20874, USA
Published online: 15 November 2013
The Defect Induced Mix Experiment (DIME-II) will measure the implosion and mix characteristics of CH capsules filled with 5 atmospheres of DT by incorporating mid-Z dopant layers of Ge and Ga. This polar direct drive (PDD) experiment also will demonstrate the filling of a CH capsule at target chamber center using a fill tube. Diagnostics for these experiments include areal x-ray backlighting to obtain early time images of the implosion trajectory and a multiple-monochromatic imager (MMI) to collect spectrally-resolved images of the capsule dopant line emission near bangtime. The inclusion of two (or more) thin dopant layers at separate depths within the capsule shell facilitates spatial correlation of mix between the layers and the hot gas core on a single shot. The dopant layers are typically 2 μm thick and contain dopant concentrations of 1.5%. Three dimensional Hydra simulations have been performed to assess the effects of PDD asymmetry on capsule performance.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.