EPJ Web of Conferences
Volume 67, 2014EFM13 – Experimental Fluid Mechanics 2013
|Number of page(s)||6|
|Published online||25 March 2014|
Modelling of natural and bypass transition in aerodynamics
1 Faculty of Mechanical Engineering, Czech Technical University in Prague, Czech Republic
2 Aerospace Research and Test Establishment, Plc, Prague, Czech Republic
3 Institute of Thermomechanics AS CR, v.v.i., Prague, Czech Republic
a Corresponding author: Jiri.Furst@fs.cvut.cz
Published online: 25 March 2014
Most of transition models are proposed for modelling of the bypass transition common in the internal aerodynamics especially in turbomachinery where free stream turbulence is the dominant parameter affecting the transition onset. Free-stream turbulence level in the external aerodynamics is usually noticeably lower and so the natural transition often occurs in flows around airfoils. The transition model with the algebraic equation for the intermittency coefficient proposed originally by Straka and Příhoda  for the bypass transition was modified for modelling of the transition at low free-stream turbulence. The modification is carried out using experimental data of Schubauer and Skramstad . Further, the three-equation k-kL-ω model proposed by Walters and Cokljat  was used for the modelling of the transition at low free-stream turbulence. Both models were tested by means of the incompressible flow around airfoils at moderate and very low free-stream turbulence.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.