| Issue |
EPJ Web of Conferences
Volume 67, 2014
EFM13 – Experimental Fluid Mechanics 2013
|
|
|---|---|---|
| Article Number | 02038 | |
| Number of page(s) | 8 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/20146702038 | |
| Published online | 25 March 2014 | |
https://doi.org/10.1051/epjconf/20146702038
Numerical modelling of temperature fields in the flow boiling liquid through a vertical minichannel with an enhanced heating surface
Kielce University of Technology, Al. 1000-lecia PP 7, 25-314 Kielce Poland
a Corresponding author: ztpsf@tu.kielce.pl
Published online: 25 March 2014
The paper presents results of heat transfer research on flow boiling in a rectangular minichannel positioned vertically, with an enhanced surface. One of the channel walls was made of thin foil powered by direct current. This foil is enhanced on the side contacting fluid in the minichannel. It is possible to observe both surfaces of the minichannel through two openings covered with glass panes. One allows detecting temperature of the plain side of the foil by liquid crystal thermography. The opposite surface of the minichannel (from the enhanced side of the foil) can be observed through the other glass pane. The observations of the flow structures allowed to calculate the void fraction for some cross-sections of selected two phase flow images. In mathematical modelling of the considered process stationary heat transfer in a glass pane, heating foil and boiling liquid can be described with Laplace equation, Poisson equation and energy equation, respectively. For completeness of the model a corresponding system of boundary conditions was given. The two-dimensional temperature fields of glass pane, heating foil and fluid was computed with the Trefftz method. The equalizing calculus used to smooth the measured data has reduced errors.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.