| Issue |
EPJ Web of Conferences
Volume 67, 2014
EFM13 – Experimental Fluid Mechanics 2013
|
|
|---|---|---|
| Article Number | 02041 | |
| Number of page(s) | 5 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/20146702041 | |
| Published online | 25 March 2014 | |
https://doi.org/10.1051/epjconf/20146702041
Measurement and evaluation of static characteristics of rotary hydraulic motor
VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydromechanics and Hydraulic Equipment, 708 33 Ostrava, Czech Republic
a Corresponding author: lumir.hruzik@vsb.cz
Published online: 25 March 2014
The paper describes experimental equipment for measurement of static characteristics of rotary hydraulic motor. It is possible to measure flow, pressure, temperature, speed and torque by means of this equipment. It deals with measurement of static characteristics of a gear rotary hydraulic motor. Mineral oil is used as hydraulic liquid in this case. Flow, torque and speed characteristics are evaluated from measured parameters. Measured mechanical-hydraulic, flow and total efficiencies of the rotary hydraulic motor are adduced in the paper. It is possible to diagnose technical conditions of the hydraulic motor (eventually to recommend its exchange) from the experimental measurements.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.