| Issue |
EPJ Web of Conferences
Volume 67, 2014
EFM13 – Experimental Fluid Mechanics 2013
|
|
|---|---|---|
| Article Number | 02063 | |
| Number of page(s) | 5 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/20146702063 | |
| Published online | 25 March 2014 | |
https://doi.org/10.1051/epjconf/20146702063
Experimental Study of Two-Phase Flow in a Horizontal Circular Channel: Influence of Gas Injection on the Bubble Diameters
1a Graduate School of Science, Engineering and Technology, Thermo Fluids M.Sc. Program, 34496 Istanbul Technical University, Turkey.
2 Faculty of Mechanical Engineering, 34437 Istanbul Technical University, Turkey.
3 Graduate School of Science, Engineering and Technology, Mechanical Engineering PhD Program, 34496 Istanbul Technical University, Turkey.
a Corresponding author: berkkurtulus@itu.edu.tr
Published online: 25 March 2014
This study aimed to examine experimentally the effects of the injector on two-phase flow characteristics such as local void fraction and bubble diameter for water-air two- phase flow in a horizontal channel having 40 mm inner diameter. During the experiments, flow rate was kept constant at 3 l/s while that for air is taken as 30 and 60 l/min. Measurements were made locally via dual optical probe and the results were presented.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.