EPJ Web of Conferences
Volume 77, 201416th International Congress of Metrology
|Number of page(s)
|19 August 2014
Primary standard of optical power operating at room temperature
1 Centre for Metrology and Accreditation (MIKES), P.O. Box 9, FI-02151 Espoo, Finland
2 Metrology Research Institute, Aalto University, P.O. Box 13000, FI-00076 Aalto, Finland
3 Fitecom Oy, Peräsimentie 8, FI-03100 Nummela, Finland
Published online: 19 August 2014
The Predictable Quantum Efficient Detector (PQED) is evaluated as a new primary standard of optical power. Design and characterization results are presented for a new compact room temperature PQED that consists of two custom-made induced junction photodiodes mounted in a wedged trap configuration. The detector assembly includes a window aligned in Brewster angle in front of the photodiodes for high transmission of p polarized light. The detector can also be operated without the window, in which case a dry nitrogen flow system is utilized to prevent dust contamination of the photodiodes. Measurements of individual detectors at the wavelength of 488 nm indicate that reflectance and internal quantum efficiency are consistent within 14 ppm and 10 ppm (ppm = part per million), respectively, and agree with the predicted values. The measured photocurrent ratio of the two photodiodes confirms the predicted value for s and p polarized light, and the spatial variation in the photocurrent ratio can be used to estimate the uniformity in the thickness of the silicon dioxide layer on the surface of the photodiodes. In addition, the spatial non-uniformity of the responsivity of the PQED is an order of magnitude lower than that of single photodiodes. Such data provide evidence that the room temperature PQED may replace the cryogenic radiometer as a primary standard of optical power in the visible wavelength range.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.