EPJ Web of Conferences
Volume 77, 201416th International Congress of Metrology
|Number of page(s)||6|
|Published online||19 August 2014|
Toward New High Temperature Reference Materials for Calorimetry and Thermal Analysis
Laboratoire Commun de Métrologie LNE-Cnam (LCM), Laboratoire National de Métrologie et d’Essais, Scientific and Industrial Metrology Centre, 78197 Trappes, France
a Corresponding author: firstname.lastname@example.org
Published online: 19 August 2014
The French National Metrology Laboratory LNE-LCM has developed a high temperature reference facility for accurate measurements of the specific heat capacity and of the enthalpy of fusion of materials over the temperature range [23 °C, 1000 °C]. The metrological approach was to modify a commercial Calvet calorimeter in order to lower the uncertainty of measurement and to insure the metrological traceability of the measurements to the SI units, in particular by designing a new calibration system. The enthalpies of fusion of pure metals (indium, tin and silver) and of a binary alloy Ag-28Cu have been measured. The results obtained on the three pure metallic materials are in very good agreement with data obtained by other National Metrology Institutes (NMIs) using adiabatic calorimetry.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.