EPJ Web of Conferences
Volume 82, 2015Thermophysical Basis of Energy Technologies
|Number of page(s)||7|
|Published online||20 January 2015|
Liquid fuel film ignition delay times on the substrate heated up to high temperatures
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
a Corresponding author: firstname.lastname@example.org
Published online: 20 January 2015
Heat and mass transfer processes under the conditions of unsteady evaporation and boiling of the liquid fuel film in coordination with the substrate heated up to high temperatures were investigated. The film thickness values and the substrate temperature (whereby the ignition conditions are not implemented) were determined. The film thickness values and the substrate temperature (whereby as low as practicable ignition delay times are provided) were found. The differences of liquid fuel film ignition condition under the local heating and the interoperating with the massive heating source were analyzed.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.