EPJ Web of Conferences
Volume 94, 2015DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)
|07 September 2015
Structural-temporal approach for dynamic strength characterization of gabbro-diabase
1 Saint Petersburg State University, 199034 St. Petersburg, Russia
2 IPME RAS, Extreme States Dynamics Department, 199178 St. Petersburg, Russia
3 Lobachevski State University, 603950 Nizhny Novgorod, Russia
4 DynaMat Laboratory, University of Applied Sciences of Southern Switzerland, 6952 Canobbio, Switzerland
Published online: 7 September 2015
This paper presents some of the results of dynamic compression, splitting and direct-tensile tests of gabbro-diabase using two split Hopkinson bar apparatus. The results of laboratory experiments on specimens without and with notch for a wide range of loading parameters are given. Strength and deformation characteristics of gabbro-diabase were determined experimentally at high strain rates up to 103 s−1. Mechanical characteristics were found to be strongly depended on the strain rate. A uniform interpretation of the rate effects of fracture of the tested gabbro-diabase is given on the basis of structural-temporal approach based on a set of fixed material constants. It is shown that temporal dependences of both the compressive and tensile strengths of the tested material can be effectively calculated using the incubation time fracture criterion.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.