EPJ Web of Conferences
Volume 94, 2015DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||4|
|Section||Modeling and Numerical Simulation|
|Published online||07 September 2015|
Atomistic modeling of the dislocation dynamics and evaluation of static yield stress
Russian Federal Nuclear Center – Zababakhin Institute of Technical Physics (RFNC-VNIITF), 13 Vasiliev st., Snezhinsk, Chelyabinsk reg. 456770, Russia
a Corresponding author: firstname.lastname@example.org
Published online: 7 September 2015
Static strength characteristics of structural materials are of great importance for the analysis of the materials behaviour under mechanical loadings. Mechanical characteristics of structural materials such as elastic limit, strength limit, ultimate tensile strength, plasticity are, unlike elastic moduli, very sensitive to the presence of impurities and defects of crystal structure. Direct atomistic modeling of the static mechanical strength characteristics of real materials is an extremely difficult task since the typical time scales available for the direct modeling in the frames of classical molecular dynamics do not exceed a hundred of nanoseconds. This means that the direct atomistic modeling of the material deformation can be done for the regimes with rather high strain rates at which the yield stress and other mechanical strength characteristics are controlled by microscopic mechanisms different from those at low (quasi-static) strain rates. In essence, the plastic properties of structural materials are determined by the dynamics of the extended defects of crystal structure (edge and screw dislocations) and by interactions between them and with the other defects in the crystal. In the present work we propose a method that is capable to model the dynamics of edge dislocations in the fcc and hcp materials at dynamic deformations and to estimate the material static yield stress in the states of interest in the frames of the atomistic approach. The method is based on the numerical characterization of the stress relaxation processes in specially generated samples containing solitary edge dislocations.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.