EPJ Web of Conferences
Volume 110, 2016Thermophysical Basis of Energy Technologies 2015
|Number of page(s)||4|
|Published online||23 February 2016|
Influence of the air Layer Between the Conductor and the Layer Ofinsulating Material in Cable Products
1 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
2 National Research Tomsk State University,, 634050 Tomsk, Russia
a Corresponding author: firstname.lastname@example.org
Published online: 23 February 2016
There are developed mathematical model of physical and chemical processes of polymerization adhesive coating stranded cable. There are shown difference in the temperature distribution along the radius of the finished product in the presence of an air gap between the conductor and the rubber sheath. Also, due to the need to change process parameters with possible loose contacts inside the cable. Such as the temperature of the heating surface, feeding speed and dwell time in the oven.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.