Issue |
EPJ Web of Conferences
Volume 110, 2016
Thermophysical Basis of Energy Technologies 2015
|
|
---|---|---|
Article Number | 01041 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/epjconf/201611001041 | |
Published online | 23 February 2016 |
https://doi.org/10.1051/epjconf/201611001041
Influence of air Gap Between the Transformer of Resistance and Object of Monitoring on Temperature Measurement Error
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
a Corresponding author: ggm@tpu.ru
Published online: 23 February 2016
In operation the description of the developed heattransfer model in thermotransformers of resistance (RTD) in the conditions of air gap between surfaces of the sensor and object of measurement is provided. Research of influence of thickness of air gap on the relative error of temperature measurement by platinum, copper and nickel thermotransformers of resistance in the ranges of temperatures corresponding to each type is executed. Dependences of minimum necessary duration of heating up of sensors on the taken temperatures are received.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.