EPJ Web of Conferences
Volume 110, 2016Thermophysical Basis of Energy Technologies 2015
|Number of page(s)||4|
|Published online||23 February 2016|
Reduction of Nitrogen Oxides Emissions from a Coal-Fired Boiler Unit
1 Siberian Federal University, 660041 Krasnoyarsk, Russia
2 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
3 S.S. Kutateladze Institute of Thermal Physics, Siberian Branch, Russian Academy of Sciences, 630090, Novosibirsk, Russia
a Corresponding author: firstname.lastname@example.org
Published online: 23 February 2016
During combustion of fossil fuels a large amount of harmful substances are discharged into the atmospheres of cities by industrial heating boiler houses. The most harmful substances among them are nitrogen oxides. The paper presents one of the most effective technological solutions for suppressing nitrogen oxides; it is arrangement of circulation process with additional mounting of the nozzle directed into the bottom of the ash hopper. When brown high-moisture coals are burnt in the medium power boilers, generally fuel nitrogen oxides are produced. It is possible to reduce their production by two ways: lowering the temperature in the core of the torch or decreasing the excess-air factor in the boiler furnace. Proposed solution includes the arrangement of burning process with additional nozzle installed in the lower part of the ash hopper. Air supply from these nozzles creates vortex involving large unburned fuel particles in multiple circulations. Thereby time of their staying in the combustion zone is prolonging. The findings describe the results of the proposed solution; and recommendations for the use of this technological method are given for other boilers.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.