| Issue |
EPJ Web of Conferences
Volume 114, 2016
EFM15 – Experimental Fluid Mechanics 2015
|
|
|---|---|---|
| Article Number | 02091 | |
| Number of page(s) | 6 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201611402091 | |
| Published online | 28 March 2016 | |
https://doi.org/10.1051/epjconf/201611402091
Heat transfer measurements and CFD simulations of an impinging jet
Czech Technical University in Prague, Department of Process Engineering, Technická 4, Praha 6, Czech Republic
a Corresponding author: karel.petera@fs.cvut.cz
Published online: 28 March 2016
Heat transport in impinging jets makes a part of many experimental and numerical studies because some similarities can be identified between a pure impingement jet and industrial processes like, for example, the heat transfer at the bottom of an agitated vessel. In this paper, experimental results based on measuring the response to heat flux oscillations applied to the heat transfer surface are compared with CFD simulations. The computational cost of a LES-based approach is usually too high therefore a comparison with less computationally expensive RANS-based turbulence models is made in this paper and a possible improvement of implementing an anisotropic explicit algebraic model for the turbulent heat flux model is evaluated.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.