EPJ Web of Conferences
Volume 114, 2016EFM15 – Experimental Fluid Mechanics 2015
|Number of page(s)||6|
|Published online||28 March 2016|
Numerical experiment about the arrangement determination of multiple bluff cylinders which obtain the most suitable new type stir
1 National Defense Academy, Department of Mechanical Engineering, 1-10-20 Hashirimizu, Yokosuka 239-8686, Japan
2 Techniche Universität Berlin, Müller-Breslau-Str. 8, 10623 Berlin, Germany
a Corresponding author: firstname.lastname@example.org
Published online: 28 March 2016
When developing the stirring rod for mixing two liquid with which the densities into which gas melted differ in little stirring operation, verification of the stirring effect was performed in the numerical simulation using a vortex method. Since it is calculation for specification examination of the preceding paragraph which creates a producing model, it becomes important to obtain a calculation result early and to feed back to the design. Two dimension calculation of the double file circular cylinder group which carried out staggered arrangement of the nine circular cylinders was performed. The aspects of the flow which strayed off from the design point or the design point were shown. The mixed degree was judged from the degree of the complexity of the flow pattern. In a design point, the complicated flow by a vortex is formed with oscillating 1 period, and interference stirring occurs. Adaptation ranges other than a design point are that the ranges of the value of P/L are 0.8–1.2.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.