| Issue |
EPJ Web Conf.
Volume 140, 2017
Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media
|
|
|---|---|---|
| Article Number | 13007 | |
| Number of page(s) | 4 | |
| Section | Powder processing | |
| DOI | https://doi.org/10.1051/epjconf/201714013007 | |
| Published online | 30 June 2017 | |
https://doi.org/10.1051/epjconf/201714013007
Processing and properties of Titanium alloy based materials with tailored porosity and composition
1 Universidad Michoacana de San Nicolás de Hidalgo, IIMM and INICIT, Fco. J. Mujica S/N, Morelia, Michoacán, C.P. 58060, México.
2 Univ. Grenoble Alpes, CNRS, SIMAP, 38000 Grenoble, France.
3 Universidad de Guadalajara, Departamento de Ingeniería de Proyectos, José Guadalupe Zuno # 48, Jalisco, C.P. 45100, México.
4 Tecnológico Nacional de México, Posgrado de Ciencias en Metalurgia ITM, Av. Tecnológico # 1500, Morelia, C.P. 58120, México.
Published online: 30 June 2017
This paper deals with powder processing of Ti6Al4V titanium alloy based materials with tailored porosity and composition. Ti6Al4V powder was mixed either with salt particles acting as space holder, so as to provide two-scale porosity, or with hard TiN particles that significantly modified the microstructure of the material and increased its hardness. Finally an original three-layer component was produced. Sample microstructure was observed by SEM and micro-tomography with special interest in pore size and shape, inclusion distribution and connectivity. Compression tests provided elastic modulus and yield stress as functions of density. These materials are representative of bone implants subjected to complex biological and mechanical conditions. These results thus open avenues for processing personalized implants by powder metallurgy.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.